If you don t dismantle the toilet, how to prevent odor My bathroom is very smelly, it comes back fro

To prevent the smell of the toilet from coming back, you need to prepare: boiling water, baking soda, and toilet brushes.

1. First, pour a bag of baking soda into the toilet bowl as shown in the picture below.

2. Next, pour a pot of boiling water into the toilet, as shown in the figure below.

3. Then wait patiently for a few minutes, and then brush the toilet with a toilet brush as shown in the figure below.

4. Next, press the flush button of the toilet bowl and flush the toilet.

Shuilu kitchen and bathroom dry goods|Toilet anti-odor prevention.

If there is an unpleasant smell in the toilet at home, the bathroom will always be covered with the smell of wanting people to escape. To avoid the smell of the toilet. Be sure to pay attention to the following three elements in advance.

Whether the reserved space for the sewage pipeline is reasonable.

Please click to enter a description of the image.

Please click to enter a description of the image.

The sewer pipe is not higher than the tile surface.

The sewer pipe has been raised above the tile surface.

The most important thing for the sewage pipe is to determine the height of the central pipe. If a flange needs to be installed, the central pipe needs to be about half a centimeter above the ground to facilitate the insertion of the flange ring. The sealing effect of the flange ring is much better than that of the direct connection, which is a good way to prevent the toilet from leaking and returning to the odor.

However, if it is the case of Figure 1, it is easy to cause air leakage and odor after the flange is installed due to the irregularity of the pipe sagging. Therefore, you must remember to tell the plumber master in advance to reserve 15-20 cm of sewer pipe, and when it is time to install the toilet, let the installer cut the most suitable height by himself, which is the easiest way and the least costly. In this way, hidden dangers can be eliminated and bad smells can be eliminated.

Please click to enter a description of the image.

The third case is: the two-hole toilet is not sealed, which is rare. There are a few toilets on the market that have double holes.

A single-hole toilet can only be connected to one pit spacing, while a double-hole toilet can be connected to two different pit spacing. Toilets with different specifications require different molds to produce, while double-hole toilets eliminate the need for a set of abrasives. This is generally a model that relatively small companies will take, and although the double-hole toilet can be connected to two pit distances, the internal pipe of the double-hole toilet is not as smooth as the single-hole, and it is easy to be unsmooth after a long period of use.

In addition, the double-hole toilet needs to be plugged with unwanted holes and closed with glass glue or tape, otherwise this place will become a hidden source of toilet odor.

Please click to enter a description of the image.

There are many reasons for the peculiar smell in the toilet, and the root cause should be investigated first, and then the prevention and control should be carried out

1. The toilet displacement is too slow.

Cause of peculiar smell: Many families have changed the equipment orientation of the toilet due to planning, standards and other reasons during the decoration, so that the toilet is not directly facing the drain, the drain is too slow, and the debris is simply accumulated, and the appearance of anti-odor is very simple.

Disposal method: The most fundamental disposal method is to move the toilet back to the original drain, but this is generally a large amount of work. The best way to save effort is to replace the toilet bowl with a very good odor prevention effect.

Second, the sewer pipe connection is not tightly sealed.

Cause of odor: When the toilet is used, it is assumed that the flange of the toilet bowl and the pipe are not tightly sealed, resulting in a part of the odor being announced from the gap, which is also the cause of the outbreak of the odor in the bathroom.

Disposal method: When installing toilet equipment, the gap between the connection with the pipe must be marked with glass glue. Glass glue can generally be used for 2-3 years, for the sake of prudence, after which you can use a knife to cross out the original glass glue every year, and then glue from the head.

Third, the toilet water seal is unqualified.

Cause of odor: The so-called water seal refers to the water storage in the toilet, which can play a role in blocking the odor from returning, and the size of the water storage height determines the ability of the toilet to block the odor. The state stipulates that the height of the toilet seal shall not be less than 50mm, assuming that the height of the toilet seal does not reach this standard, there can be a situation of aftertaste.

Disposal method: When purchasing a toilet, you must pay attention to its water seal height. The height of the toilet seal must meet the standards stipulated by the state, but although the higher the height of the water seal, the better the anti-odor effect, but with the increase of the water level, the more brief the splashing question.

Therefore, it is best to choose a product with a water seal height of 55-60mm.

Fourth, the glazed quality of the toilet is poor.

Cause of odor: Assuming that the glaze sealing of the toilet itself is not good, it will be very simple and slightly dirty, dirty, and not easy to clean, and after a long time, the toilet itself will have a lot of odors.

Disposal method: The complete cure method is to replace the toilet with better quality, assuming that it cannot be replaced temporarily, then it is necessary to pay attention to cleaning, and the frequency of cleaning needs to be increased to ensure that the stains are discharged in time and will not have a peculiar smell. You can place toilet deodorant, you can also spray a small amount of perfume, and often open the toilet exhaust to discharge odors.

The first thing to ask is if your toilet has its own trap. If it is a toilet with a trap, the smell cannot come from the toilet. If the toilet is straight-through without a drain, then if you don't replace the toilet, it won't be odor-proof.

You should find a professional plumber to go to the site to check before you can take appropriate anti-odor measures.

Use glass glue to re-coat the place around the toilet bowl in contact with the ground, under normal circumstances, the odor you are talking about is released from the gap between the ground and the toilet bowl.

Wash regularly with a toilet cleaner that specializes in toilet washing.

After reading a bunch of official answers, it's uncomfortable Don't pretend to understand If you don't understand, it will stink because there is no sealing ring at the bottom when you install it, and there are 2 screw holes in the back that are not blocked, and the smell runs out of the screw holes, and you can block it without disassembling the toilet Stretch your hand behind to determine the location of the 2 holes, find a piece of paper that is harder, and cover it with glass glue and cover it on the 2 holes.