The difference between a siphon toilet and a flush toilet

1. Straight flush type.

The flush toilet is the use of the momentum of the water flow to discharge the dirt, the general pool wall is steep, the water storage area is small, so that the hydraulic concentration is concentrated, the water force around the circle is increased, and the flushing efficiency is high. Using the large thrust formed by the compressed air, the flushing speed is fast, the impulse is large, the sewage is strong, the speed is fast, the water is less, and there is no leakage. Because the flush type uses the instantaneous and powerful kinetic energy of the water flow, the sound of hitting the pipe wall is relatively loud.

The rear drainage is mostly a direct flush type. The flush toilet drain pipe has a large diameter, which is easy to flush down larger dirt.

>2. Siphon type.

The structure of the siphon toilet is that the drainage pipe is of the " type, after the drainage pipe is filled with water, there will be a certain water level difference, and the suction generated by the flushing water in the sewage pipe in the toilet will be discharged. Siphon toilets are also divided into two types: vortex siphon and jet siphon.

> straight-flush toilet structure diagram In fact, no matter what flushing method of the toilet is chosen, there will be worries and annoyances, from the perspective of water saving alone, it must be slightly better than the straight flush type, but if there are quiet elderly people at home, you have to consider. Although the siphon type is not perfect in the combination of water saving and flushing, the development in the domestic market has been very mature, and it is silent and odorless.

Siphon toilets are different in shape, volume and sewage principle.

Siphon toilets.

If the toilet area ratio is large, then you can consider using a siphon toilet, because the "size" of a siphon toilet is "chunky".

1) Pros. The siphon toilet produces a pressure suction through the inverted S-shaped pipe, which can absorb the swag adsorbed on the inner wall, and is very quiet and quiet. The water seal area is large, the anti-odor effect is good, and it will not affect the freshness of the indoor air.

The suction power is relatively large, and it is easy to suck away the stolen goods.

2) Disadvantages. Draining is slower and more prone to clogging. There is also a lack of water conservation.

2.Flush toilets.

If the toilet area is small, then it is best to choose a flush toilet, this type of toilet is relatively "slim and tall", and is the first choice for small apartments.

1) Pros. Flush toilet, it uses a large thrust formed by compressed air, fast flushing speed, large punch, strong sewage discharge, easy to flush away larger stolen goods, no need to prepare paper baskets in the bathroom, and water saving is also better than siphon toilets.

2) Disadvantages. However, the flush type uses the instantaneous strong kinetic energy of the water flow, so it is noisy when used. In addition, the water seal area is small, the anti-odor effect is poor, and the stolen goods that adhere to the inner wall cannot be taken away.

Straight flush toilet The principle of the siphon toilet 2 Advantages of the siphon toilet Good anti-odor effect 4 It is not recommended to use the shape of the siphon toilet There can be no U-shaped water pipe that is too long.

Flush toilet or siphon toilet, which is more cost-effective? I also just realized that what I learn is what I earn.

Slow toilet draining? Siphon straight straight don't choose the wrong one!

Due to the importance and frequency of use of the toilet, slow drainage is a very troublesome topic. In addition to the reasons for later use such as clogged pipes and insufficient water pressure. Choosing the wrong toilet is also an important factor.

If you choose the wrong toilet, even the best toilet will drain slowly. In addition to looking at the displacement, pit spacing, and quality of the toilet, it is especially reminded that you also need to look at whether the sewer pipe has a trap.

If there is a trap in the sewer pipe, then only a floor-standing flush toilet can be used. If you don't have a trap, you can use a siphon toilet and a wall-hung toilet. What is the reason for this?

It turns out that the siphon toilet comes with a trap and the trap of the sewer pipe are superimposed, which will trap air in the middle and cause poor toilet drainage.

So how do you tell if your own pipe has a trap?

1. The easiest way: Before installing the aluminum gusset in the bathroom, look up at the pipe setting on the top of the bathroom, which is the easiest and safest method, regardless of whether there is a displacement of the customer.

The following is the difference between a village bend and a bend without a trap.

No trap There is a trap.

2. The more complex operation method is suitable for friends who have installed aluminum gusset in the bathroom and do not want to dismantle, or who are installing gypsum board.

u Prepare tools: a large basin of water, a long stick.

u Pour a large basin of water into the sewage pipe first, then poke into the pipe with a long stick, and then take out the pipe to observe whether there is a large area of moisture at the end, if there is a large area of moisture, it means that the pipeline has a trap, if there is no moisture, it means that the pipeline has no trap. (This method is limited to cases where the pipe is not shifted).

Choosing the right toilet is usually the first element of drainage, of course, in addition to the toilet purchase, you must also pay attention to the flange interface when installing the toilet. The flange connection is misaligned, which will also cause the toilet to drain slowly. Therefore, when the master installs the toilet, it is best to supervise the whole process, and be sure to confirm that there are no mistakes in the installation location and method.

The differences between a flush toilet and a siphon toilet are: sewage discharge capacity, anti-clogging ability, anti-odor effect, noise level, and price.

1. Sewage discharge capacity.

From the point of view of sewage capacity, the flush toilet is definitely better than the siphon type. Because the flush toilet is hydraulically concentrated and flushes quickly, the dirt will be discharged relatively easily and quickly. Although the amount of water in the siphon type is also very large, it is difficult to discharge the dirt by water pressure and air pressure alone, especially the large suspended solids, which will be more difficult to discharge in time.

>2. Anti-clogging ability.

From the point of view of anti-clogging ability, the flush type is still better than the siphon type. This has nothing to do with the pipes they have built-in. The diameter of the pipe in the flushing toilet is large, the structure is simple, there is no water trap, the path is short, and the flushing force is large, which is not easy to cause blockage.

>3. Anti-odor effect.

As mentioned earlier, siphon toilet pipes contain traps, which affect the flushing effect, but can play an effective role in preventing odors. Therefore, it has a better odor prevention effect than a flush toilet.

>4. Noise level.

In terms of noise, the noise of a siphon toilet is much lower than that of a flush.

>5. Price. At present, the price of many brands of siphon toilets on the market is much higher than that of direct flush toilets, so on the whole, direct flush toilets are more cost-effective.

The siphon toilet uses the siphon principle, and the water surface in the toilet rises after the water is discharged, and when the water level is higher than the bend, the siphon effect is generated, so that the water is discharged. It is characterized by silent flushing (very quiet), heavy water use, and visually unsightly (you will see excrement swirling around in the water, if you look at it after relieving it).

The flush type uses the pressure of the water flow to wash away the excrement, and is characterized by loud flushing and water saving.

The toilet flush is old-fashioned, and its main working principle is to rely on the impulse generated by the water to flush the debris down, so it is difficult to flush the water at one time; The siphon toilet is different, it mainly relies on the suction generated by a small amount of water to suck the debris in the toilet down, and it can be basically cleaned by releasing water at one time.

The flush type uses the pressure of the water flow to wash away the excrement, and is characterized by loud flushing and water saving.

1. The main difference between a siphon toilet and a flush toilet is that the structure of its flushing system is different.

2. The siphon toilet forms a vortex when flushing, which produces a certain suction force, so as to suck the things in the toilet into the trap and discharge it into the sewer pipe system, so the impulse of this kind of toilet is small.

3. The sound of siphon toilet flushing is not as loud as that of a direct flushing toilet, and it also has a very good anti-odor function, which can flush out the dirt in the pipe.

4. The direct flush toilet is the flush toilet with direct water, and the flushing structure of this kind of toilet is relatively simple, so its price is relatively low compared with the siphon toilet. However, the sound is a bit loud when flushing, and the trap is small, which is easy to form dirt.