-
Anonymous users2024-01-24Generally impossible, the probability is very small, the carpenter needs to be fixed with screws, the painter needs to repair the nail hole, if it is not good, the carpenter will be notified, unless your top is damp or the master cuts corners, the solution is to take down this gypsum board, and then replace it, call the painter to reprocess, if the top down will be troublesome.
-
Anonymous users2024-01-23plasterboard next to the wall.
Use a paper cutter to open a few holes (the size of the hole can be entered by the arm, and the cut drywall is retained and needs to be pasted back). Buy some quick-drying powder (sold in building materials stores), wet the gypsum board, find someone to help, put the gypsum board back in place, quick-drying powder and porridge-like, quickly put it into the gypsum board from the hole and stick it between the wall, after 3 to 5 minutes, and then put the back of the retained gypsum board and the good quick-drying powder to stick it back, wipe the quick-drying powder in the gap, and flatten the sandpaper after drying.
-
Anonymous users2024-01-22It can be glued down and then nailed with a gas gun nail to prevent falling off.
-
Anonymous users2024-01-21Re-glue it and re-treat the surface.
It is generally not recommended to install it, after all, it will not produce too much noise at home, and it is not much use to install it, the budget has also increased, and the soundproof cotton is easy to catch fire, there are great safety hazards, I hope to help you.
1. Material properties of the ceiling gusset.
However, pure aluminum is softer, so the aluminum gusset on the market is actually a ceiling made of aluminum alloy, there are aluminum-magnesium alloy aluminum-manganese alloy and other aluminum-manganese alloy gusset with high hardness, aluminum-magnesium alloy increases the hardness at the same time, but also adds some brightness, good texture, strong decorative effect, high-quality aluminum-manganese alloy gusset because of good corrosion resistance, commonly known as stainless aluminumSpecial tips: there are some inferior substrates on the market, using garbage aluminum, recycled aluminum or miscellaneous aluminum, etc., the product is easy to deform and oxidize. Some are even recycled scrap aluminum containing harmful substances such as chromium, lead, mercury, etc., this kind of aluminum gusset substrate has a low price, high hardness, and a certain thickness, which is very deceptive to cherry cracks. >>>More
As long as the water intake is not too much and does not continue, it is fine. It absorbs itself and slowly evaporates.
Depending on the weight of the main light, it is not allowed to exceed 3kg. >>>More
That refers to the place where the local ceiling is turned at a right angle, and the gypsum board is not cut into two pieces of horizontal and vertical splicing, but with a whole (or half) of gypsum board cut into a right-angle shape and fixed to the bottom surface of the ceiling, commonly known as the figure 7 installation method. Generally, there is no need to make a double layer, the first layer can be cut into two pieces and fixed on them, and the bottom one can be done like that. Except, of course, that requires both floors to do so. >>>More