-
Anonymous users2024-01-24What should I do if the floor drain cover of the bathroom sewer can't be opened, it seems to be stuck to the cement, and it hasn't been opened after knocking for a long time?
Hello, this situation may also be that the glue is sticky, such as being stuck by the beauty sewing agent. It is recommended to put some hot water appropriately, so that the glue can be softened, and Fang Xian will take out the lid.
-
Anonymous users2024-01-23Are you sure you haven't opened it after knocking for a long time? Don't see any knock marks?
Gently tap the various positions around the middle disc (if you hit too hard, it may break), and at the same time clean up the gaps around the disc with a thin wire or something. If the disc is loose, you can try to hook it up, if you can't hook it, try to rotate some angles left or right (some may have buckle slots) to hook up.
Repeat the above method a few times, and it should be able to hook up. It is easy to hook up when you usually hook it up and take care of it.
-
Anonymous users2024-01-22Generally, the lid of the floor drain has a hidden buckle, you can turn it around and try it first.
-
Anonymous users2024-01-21I don't think the drain lid in this bathroom could lift it, not because it was stuck to cement, but because it was rusted by the dirt that was swirling around for a long time.
The solution is:
1.You can mix some baking soda with hot water, pour it on the lid in a circle and soak it, and then go back and forth, and it will be uncovered after a few minutes of soaking.
2.If you still can't open it with the above methods, you can find a small tool crowbar, with a pointed side and a flat one, just pry around the floor drain cover to get it open.
This situation is a common thing, in fact, as long as you use your brain, it is not difficult for him to get rid of the disease.
-
Anonymous users2024-01-20I also encountered such a situation, he was not stuck to the cement, but by the beauty sewing glue. You can put some hot water in it so that the glue softens and the lid can be easily removed.
-
Anonymous users2024-01-19The bathroom sewer floor drain cover can not be opened, because the cement pasted with cement is very firm when pasting, and it must be cut along the perimeter of the floor drain cover with a cutting machine, cut it, and then take it down with a hammer after cutting.
-
Anonymous users2024-01-18When the bathroom sewer floor drain cover is pasted, the inside is pasted with cement, and after it dries, the cement will be defeated, so it must be cut with a saw, along the floor drain cover. The edge is cut and warped, and after cutting, you can take it down by knocking it with a hammer.
-
Anonymous users2024-01-17If the floor drain of the bathroom sewer cannot be opened, first of all, you have to confirm whether your floor drain is square or round, if it is square, it must not be opened, if it is round, you try to rotate it to see if it can be opened?
-
Anonymous users2024-01-16What should I do if the floor drain cover of the bathroom drain cannot be removed? It seems to be dirty with cement, and it hasn't been opened after knocking for a long time? Personally, I think that if this is the case, then it must be knocked open, otherwise the lid will be more difficult to open.
-
Anonymous users2024-01-15What should I do if the floor drain cover in the spiky sewer can't be removed? It seems to be stuck to death by cement, and it hasn't been opened after knocking for a long time, which should be asked by a professional master.
Generally, the floor drain cover is buckled, and then look at the card rod on the floor drain cover, and then align the card stick with the notch, pull it to open, don't care about the other side, just take it on the open side. >>>More
1. There are many holes in the floor drain cover, and a small hook is made with an iron wire, which can be hooked out when it reaches into the bend. >>>More
Summary. Qinqin is very happy to answer your questions, I found that there are many holes in the floor drain cover, and a small hook is made with an iron wire, which can be hooked out when it reaches into the bend. >>>More
This kind of floor drain is a large water seal odor-proof floor drain, the height of the water seal reaches the national requirements of 5cm, and the water seal storage capacity exceeds 300ml, which can ensure that it does not dry up for 30 days, and there is no one at home for a long time, and there is no need to worry about the overflow of odorous germs, and the water seal of other products on the market is located in the drainage pipe, the volume is too small, and it is easy to dry up, resulting in the failure of the water seal, and it cannot play the role of actual anti-odor, anti-virus and anti-bacterial. At the same time, it also has a siphon function, and the water is faster than the general floor drain.
It could be that the drain trap is leaking. When the trap runs out of water, the water upstairs flows downwards and the drain pipe is pressurized, and when it flows downward, negative pressure is formed (absorbing the bathroom gas) to form a force of increasing or decreasing air pressure, thus making a sound. This is just speculation....Because sound is produced by the vibration of an object, the vibration of an object is produced by an acting force, which is an immutable law.