-
1. There are many holes in the floor drain cover, and a small hook is made with an iron wire, which can be hooked out when it reaches into the bend.
2. Hook out the wire with a hard point and a thick point, and hook it slowly.
3. Find a hard and thick wire, hook it out, hook it slowly, don't be in a hurry. Floor leakage and seepage in the bathroom are still relatively common, generally because the concrete around the floor drain buckle pipe is not dense enough, and the waterproofing is not in place. Floor drain selection is to choose big brand products, only good brands will have quality assurance, floor drain is an important interface connecting the drainage pipe system and the indoor ground, in the bathroom decoration link is a very critical step.
-
Hook out with a hard and thick wire, hook slowly, don't rush too much.
Summary. Qinqin is very happy to answer your questions, I found that there are many holes in the floor drain cover, and a small hook is made with an iron wire, which can be hooked out when it reaches into the bend. >>>More
Generally, the floor drain cover is buckled, and then look at the card rod on the floor drain cover, and then align the card stick with the notch, pull it to open, don't care about the other side, just take it on the open side. >>>More
It is still necessary to use a small hook or dredge at the front end of the wire to salvage it, because after a long time, the dirt will gather on the filter element of the floor drain and cause the pipeline to be blocked and cannot be used, and then it will be more troublesome to dredge and salvage.
When the air pressure in the sewage pipe reaches a certain pressure, the gas will come up. >>>More
The easiest thing is to ask a professional person to do it, that is, to break the cost, and you can also try it yourself if you have that kind of pipeline equipment.