-
Anonymous users2024-01-24There is no way for plastic brushes to degrade or soften.
If the brush is too big to flush down, and it can't be hooked out with wire, then you can only ask a pipe dredging professional, and people are likely to have to dismantle the toilet to take out the brush.
Don't throw paper or squat in until you dredge it.
-
Anonymous users2024-01-231. Buy a leather bowl in the supermarket, before using it, first use warm water to soften the leather bowl so that it can better create a confined space, and then flush it to increase the pressure and enhance the success rate of opening the toilet.
The sewer pipe is old-fashioned, and what to do if it falls is a large brush wood.
You have to find a way to pull it out, otherwise you can only change the toilet. I have a long spring that runs through the toilet, but I can't do anything about something as hard as a brush.
What kind of clip to clip the brush out, if it really doesn't work, call to find the pipe.
The easiest way is to add the appropriate amount of water to the toilet bowl and press the leather bowl at the toilet mouth with the help of a certain force of water. You can also buy some caustic soda to boil water, melt the caustic soda and pour it into the toilet, after chemical reaction, the dirt in the toilet bowl will be corroded, wait for ten minutes and then rinse it with clean water. You can also use a good quality plastic water pipe, connect the tap water at one end and plug it into the toilet mouth at the other end, and then block the toilet mouth with something like rags, and then turn on the tap water, which will use the water pressure to dredge the pipe.
Take it out, or it will be troublesome, but don't expect the brush to rot in the water.