-
Anonymous users2024-01-241. Electric turntable (see Figure 1).
First, level the round table with a level, and lay the turntable flat on the round table so that the two are concentric. Then lay the rotating surface (glass plate, stone plate or wood board, etc.) flat on the turntable, and make the three concentric, and plug into the power supply. The switch is set by the user and can be switched by wall or remote control.
It is recommended to be operated by a waiter. The serving begins to turn, and the guests stop after leaving. Our factory can be equipped with remote control switch.
2. Electric turntable (see Figure 2, Figure 3).
1) Select the position, determine the center, put the base and level it.
2) Install the disc and level it.
3) Install the diameter beam, oblique beam and ring beam and level it.
4) Install the rotating surface and level it.
5) Install a ring dining table.
6) Connect the power supply, turn on the switch and use.
There is a problem with the bearing! Contact for repair!
1.Preparation tools: Phillips screwdriver, ruler, pencil, electric drill, screws. >>>More
Nowadays, many families have a fixed restaurant pattern, which is destined to become an inevitable trend of customization of our restaurant furniture, restaurant furniture should be placed in combination with the overall pattern of our restaurant, starting from the general situation, do a good job of local customization, pay attention to the consistency of style. The content is from the groundhog renovation.
If it is a rectangular table or an oval table, it is recommended that the short side or small round end be placed at the north and south ends. This arrangement is more in harmony with the space of the house.
This friend, you should ask a professional designer to come up with a design drawing, the cost is about 200 yuan.