Panshan flooring, I want to buy David flooring, solid wood, is there a high end one, solve! Thanks

1. Unreasonable structure: The moisture content of the floor covering and the equilibrium moisture content are not understood before the city blindly uses natural methods to fight against tight bagging caused by the main reason for the floor, there are some reasons why the humidity is manufactured on the pavement floor causing excessive moisture to form the floor tile bagging any wet treatment is too large. Page 2, Consumers caused by improper use generally focus on wiping the floor with an unwrung out damp cloth or accidental moisture on the floor, resulting in excessive moisture caused by the floor tile sample bagging.

Second, cracking. A lot of wood will deform or crack in the natural environment or in the conditions of drying. Cracked wood flooring affects its quality grade, but sometimes due to improper control of the drying process, it will cause cracks to form a hidden defect, which will gradually be revealed during use, in general, the humidity in contact with the ground at the bottom around will be slightly higher on the floor itself, so the resulting extrusion of each layer of moisture absorption expansion leads to cracking, cracking and some wood fiber materials themselves, which is difficult to avoid. If there is a large number of floor cracks that can be process-related, you should contact the manufacturer to solve the problem.

Third, this issue should be in the ring.

When laying problems, it should be for a reason, the gap between the floor and the floor is too small, and the steps between the two slabs rub against each other upwards, producing a sound. Page 2, when there is an imbalance between the pavement, the floor, the ground keel jade and the gap between the keel. Page 3, The water on the ground is not fully released before the wooden floor is laid.

In this case, it can be re-laid, and the main thing to pay attention to is a suitable environment to keep the room wet and avoid contact with water on the ground.

Fourth, paint peeling is usually caused by moisture or paint on the floor, because due to the poor, but not useless paint quality and construction process of the relationship between the material itself.

Fifth, the gap is relatively large.

The floor is installed in the damp or the floor itself is humid, forming the current floor shrinkage cracks. In this way, there are still a lot of problems in your family.