-
Anonymous users2024-01-24The construction of the waterproof screed should be carried out after the construction of the screed. The drainage slope of the ground to the floor drain is 2%; The edge of the floor drain is 50mm outward, and the drainage slope is 5%; The ground of a large area of public toilets and baths should be partitioned, and a floor drain should be set up in each district, and the drainage slope in the area should be 2%, and the straight length of the slope should not be more than 3m; The floor of the foyer of the public toilet can be unsloped.
The slope of the ground should be made in advance when the ground is leveled, that is, when the ground is leveled, the slope of the ground is also towards the position of the floor drain. In doing so, it is more conducive to drainage. If you just look for the slope when laying the tiles, then there is a possibility that the ground (under the tiles) will accumulate water.
How to find the slope of toilet 300800? Large-scale leveling, local slope to the floor drain.
In this case, it is usually necessary to determine one main floor drain as the lowest point of the bathroom, and the other, if retained, cannot be lower than the height of the main floor drain. Most of them are bathed as the main floor drain. Next to the face pool, some people use it as a mop basin for drainage, and some people keep it, and if it is convenient, it can be used as a washing machine.
Just pour some water down and see which direction the water flows. Or observe, there should be a floor drain in the bathroom, and the slope must be tilted in the right direction, and it must not be tilted towards the door. >>>More
If the thickness is less than 5 cm, mortar ash can be used, and more than 5 cm can be used bean stone concrete.