-
Anonymous users2024-01-24The bathroom floor must be set up with 1 to 2 floor drains, because the bathroom generally has to install a water heater, every time you take a bath, the bath water must be discharged through the floor drain, and the toilet washbasin and the drainage of the washing machine should also be discharged through the floor drain, the current floor drain design is very beautiful, will not affect the overall effect of the bathroom, so the bathroom must be set up floor drain, so it is very convenient to use.
-
Anonymous users2024-01-23The bathroom bridge deck floor is waterproof, and there is no need to press more on the ground, I just need to make a record.
The shower area should be 180 cm.
This should not be in place! >>>More
The cause of the wall leakage is most likely caused by the destruction of the waterproofing layer you made at the time. If you want to solve the problem fundamentally, you can only smash the wall tiles and redo the waterproofing, but it is more troublesome and costly. It is recommended to use penetrating crystallization, waterproofing agent and other coatings to paint about 3 times along the gaps of the tiles. >>>More
The bathroom is divided into dry and wet areas, and the dry side is brushed to the meter, so that the moisture will not turn over to the outside wall, and the wet area is sprayed, so it is necessary to brush to the meter to control the outside wall from being affected.
No, the general-purpose waterproof is not effective, but the construction is more convenient and simple than rigid and flexible construction, no adjustment, and the material damage is small.
This is not possible, cracking and some more troublesome waterproof layer cracking, need to be treated before paving the floor tiles.