How to wipe the furniture out of reach?

Updated on furniture 2024-08-23
1 answers
  1. Anonymous users2024-01-24

    Where the furniture is out of reach, you can buy an extension rod to wipe the furniture and windows, and then you can send it.

Related questions
1 answers2024-08-23

The toilet outlet is at the bottom of the middle, which is connected to the large drain pipe (mouth-to-mouth with the underground water port), and the outlet can only be seen when the toilet is reversed. Generally, the blockage does not have to be disassembled, and the method of opening is to press hard on the bottom hole of the bucket pit with a special leather roller for the toilet to push and pull up and down, so that the water vibrates repeatedly, and there is no leather roller to use the nylon wool round roller of the brush toilet to insert it inside and outside the pit hole at high frequency, and the effect is better, so that the water in the hole vibrates at high speed, causing the blockage to be flushed out of the water with the water vibration and changing shape,-- the secret of success: the above operation must be operated by pouring the toilet full of water!! >>>More

3 answers2024-08-23

If you can't rush one meter from the balcony, how can you get rid of the big tree under the balcony? You can use a rod to stick it to the heel and you can remove it.

1 answers2024-08-23

Wipe it with a soft rag first, then wipe it with a small brush to make money, then take it to the drying room to dry, and then wipe it until it meets the requirements.

2 answers2024-08-23

If you really don't have it, and you're really anxious, then it's the only way to go, after all, a living person can't be suffocated by urine.

2 answers2024-08-23

I am a home factory, every day to produce this kind of furniture, first depends on whether you do open paint or closed paint, let me tell you a process: 1 wood polished, 2 thin layer of Depot paint, 3 polished, 4 wipe color, wipe water color (if you do closed paint, hydrating putty), if it is open paint, do not do this process, 5 polishing, 6 spray primer (if you do closed paint, you have to spray the pores flat), open paint should be thin, 7 polishing, 8 color repair (be sure to look at the color you like Note that the color will be a little darker after the paint dries.9 For topcoat, I suggest you find a furniture factory to process it, or find a painter in a furniture factory to do a good job.