-
Anonymous users2024-01-24Injection molded parts will be broken during use or installation, if it is a thread twist, check whether the sealing ring is broken, if there is a crack in the whole part of the pouring, please remove it and glue it with plastic glue, no special glue can be used 502 or super glue.
-
Anonymous users2024-01-23As soon as the water is put into the water tank, it leaks, isn't it, it's easy to help, it's simple, go buy a rubber ring, your previous rubber ring is not good to use, it's really not good, add two rubber rings, duel the line, I believe brother, brother has tried it himself.
-
Anonymous users2024-01-22You are using the water tank inlet valve produced by Xiamen Weidia Sanitary Ware, which is a relatively old product. There is no way to repair the leakage in the picture, this position is glued together by two injection molded parts through a special glue (502 cannot be used) during production, of course, there is a service life. So, you go to the building materials store and buy a new water inlet valve, and the brands you can choose from are:
WDI and R&T should be the most used brands in China, and the price will be a little more expensive, with the market around twenty or thirty. Pay attention to the diameter of the joint (25mm for domestic use).
As shown in the figure, the circle shows the decorative cup, and when it is twisted open, you will see the gland (usually a copper or stainless steel hexagon nut gland) pressed against the valve core. After removing the gland with a wrench, check whether the internal structure of the valve core is damaged, and it is recommended to replace the valve core with a new one.
Is the problem very general, where is the toilet leaking, if it is leaking from upstairs to downstairs, you must find a professional to do waterproofing. If it's a leaking water pipe, you can get it yourself or find a property.
One possibility is that the inlet raft in the toilet tank is damaged and not closed tightly, or the position of the float has changed, so that the inlet raft cannot be closed completely. When the water level in the tank exceeds the drain, the toilet leaks. The second case is when the plug of the toilet drain is torn or missing. >>>More
The blue one is the toilet flush button, which is installed on the toilet tank cover, this button should also have a nut, you put the button from the top of the tank lid into the button hole, and then use the nut to tighten it, and then connect the chain on the drain valve cover to the hook of the button, and it's OK. >>>More
There are two possibilities: one is that the sealing ring of the vertical pipe in your water tank is damaged, and the maintenance method can only replace the sealing ring of the vertical pipe with all the sealing rings, or after draining the water, after the pipe wall is dry, stick it to death with two-to-one glue (a groove is rotten, and then it is broken, the vertical pipe must be removed destructively). >>>More