How to make furniture by hand

The best thing to do is to go to the furniture factory and order a small piece of wood. Then do it as the furniture looks like. Art doesn't need any wood. Screws. Just buy a few bottles of 502 glue and stick it. Get a paper cutter.

Folding a small computer desk, the kind that can be placed on the bed, hehe, just buy a few small hardware to connect it.

Step 1: Choose the wood.

Go to a good lumber store and pick up some hardwoods. There are many large log stores in Europe, and Kimura follows strict standards in drying and cutting, and can cut and open tenon grooves for free, so when consumers buy, they only need to say the requirements, first coarse and then fine.

Step 2: Processing of wood.

Wood can be planed at the lumber shop.

><>Step 3: Blanking according to size.

In this example, we will not provide you with drawings, because it is relatively simple, the overall size is 28 inches high and 25 inches wide, and we mainly learn about their production process. After the wood is planed, it can be cut and cut according to the requirements.

Step 4: Cut the angle.

The two planks are cut at a 45-degree angle, and one side of the plank is tenoned and the other side is grooved. In this way, the wood board is tightly occluded, and there are certain specifications for tenoning and slotting in European wooden furniture. If you have a professional tool to open the tenon when making it, if not, use an L-shaped fitting to fix it on the back.

Step 5: Layout.

Check the full size layout and indicate the attachments. Domestic furniture is generally fixed with wooden screws when connecting, but in Europe, traditional high-end furniture is glued together. There are standards for bonding time and drying time.

Step 6: Groove and tenon.

Use a professional tool to glue, tenon, and groove the planks at a 45-degree angle.

Step 7: Gluing.

The planks are joined with carpentry glue and fixed with professional fixtures to ensure the sticking time and drying time of the boards.

Step 8: The back panel of the furniture.

If you like to see the wall, you can do without the backboard, here the author uses a semi-backboard, the backplate is not only used to block the back, but also to connect and reinforce. The back plate here does not use the domestic five-layer board, the side slotted style, but the same tenon groove as the side plate. Strengthen overall firmness.

Step 9: Grinding.

If you don't care about the good paint, it won't work if you don't care about it. European furniture, in the polishing of excellence, requires flat, smooth, burr-free. Choose from different grinding specifications.