-
Anonymous users2024-01-24Do not mix lighting and sockets, your home socket should be a switch with leakage protection, this kind of switch has a principle, that is, its inflow current should be equal to the outflow current. That is to say, if your load live wire passes through this switch and the neutral wire does not, then she will trip. I don't know if you understand?
-
Anonymous users2024-01-23You confuse the neutral line of the lighting with the neutral wire of the socket, either all the wires use the common live and neutral wires, or they are separated.
-
Anonymous users2024-01-22It is recommended to separate the lights in the bedroom and living room from the socket line, and do not share the lamp with the neutral line of the socket, otherwise the neutral line is prone to induce current and cause tripping.
-
Anonymous users2024-01-21It looks like the neutral line is common.
The neutral live wire under the leakage protector cannot be used in common with the neutral live wire of other circuits.
-
Anonymous users2024-01-20You can use one neutral wire for all, and your problem lies in the live wire of the socket.
It may be that the switch is small, there may be aging electrical parts, there may be where the wire is a little broken and grounded, etc., find an electrician to see, it should be free.
This kind of fault is a common fault, but it is not a simple fault, and it must be tested by a professional electrician on site. The analysis is as follows: 1. Your method of judging the water heater is correct. >>>More
Because the lamp has not yet been incorporated into the air switch circuit, it is not affected by the air switch. It is recommended to change the light circuit to the wall switch circuit. Second, it may be empty and tripped, but irregular, there is no phase disconnection, and the light is still charged although it is not lit. It is recommended that the air switch cut the double wire, and the light switch cut the phase wire.
In fact, if the line cannot be changed, the live wire is changed to the ground wire, and the ground wire is used as the live wire, first of all, it is necessary to ensure that the original ground wire is intact, and there is no open circuit and short circuit situation.
The voltage is unstable, the power is too large, and sometimes the electrical appliances at home are turned on too much, and it will be like this if the rated power is exceeded. Unplug appliances that you don't use at home. Microwave ovens, refrigerators, televisions, computers, range hoods, water heaters, hair dryers, air conditioners, electric baking pans and other electrical appliances are easy to trip if they are turned on at the same time.