-
Anonymous users2024-01-23Because the lamp has not yet been incorporated into the air switch circuit, it is not affected by the air switch. It is recommended to change the light circuit to the wall switch circuit. Second, it may be empty and tripped, but irregular, there is no phase disconnection, and the light is still charged although it is not lit. It is recommended that the air switch cut the double wire, and the light switch cut the phase wire.
-
Anonymous users2024-01-22The lights and switches are not all the way (controlled by two different switches).
-
Anonymous users2024-01-21The zero line, that is, the ground wire, is broken, and the electric tester measures that there is electricity, right?
1.There may be short circuits in living room wiring, electrical appliances, wiring boards, etc. >>>More
There are several reasons why a switch trips. 1 overload, 2 short circuit. 3. The switch itself is the reason. If the line or load is fine, it could be the switch itself. >>>More
Find those plugs and see if they jump? Or jump and change the switch.
If you do what you say, it should be caused by overvoltage. You should be using the DZ4732A switch. I don't know what brand it is. But if the voltage exceeds 240, it will jump. The electricity consumption during the day is small, the voltage drop is small, and the temporary electricity is unstable.
The air switch in your kitchen always jumps, there are no high-power appliances, you can change a new air switch, and there is no more money, it is more than 20 yuan, if you jump again, that is, there is something wrong with the electrical equipment, you will send the appliances one by one, to see if it is a specific water heater jump, or a rice cooker work jump, or a microwave oven jump, find out the specific electricity, and measure it with a shake meter.