-
It's pretty much correct, but it seems to be missing two rubber rings, and where I drew the red line, there's a plastic pipe that is connected to the overflow window of the basin.
-
If you install it this way, the sewage will reach the hose because gravity will pull the hose out of the drain.
-
It's not much, it's better to pretend and try.
-
What's on the top right? It looks like it will leak if it is blocked, so it's best to take a picture of the manual and send it in.
The size and installation of the kitchen sink sink and sink sink are as follows; >>>More
1.Bonding the following basins and marble should not be glued with glass glue, because glass glue is soft, it can be used for sealing, but the strength is far from enough. >>>More
First of all, if your stove, sewer fittings, and sewer pipes are all done according to the regular dry, there will be no problem, and the height of the stove and sewer pipe are all regulated. These are also considered in the manufacture of sewer fittings, so there should be no problem with normalcy. >>>More
According to the degree of decoration, the height from the ground is different, the distance from the cabinet floor is 12cm, the height of the P-shaped trap is 12cm, the minimum height of the pipe center is 25cm from the forming surface, and 30cm from the blank surface. >>>More
Hello, I feel that it is better to put it on the table, and it is more convenient to do so, so that you will not be particularly tired when washing vegetables.