-
Anonymous users2024-01-241. There are many pipelines below the floor of the bathroom, which will cross with other pipelines.
2. There is a lot of water in the bathroom, which is easy to cause potential safety hazards in the long run.
3. The relative area of the bathroom is relatively small, and it is not easy to install and maintain.
-
Anonymous users2024-01-23Answer: It's best not to fit it in the bedroom. Once it's broken, the water is bubbling and there's no place to sleep. In addition, the bedroom is private. Repairs are also not very convenient. It's also inconvenient to walk around while rinsing. It is more convenient to be close to the sewer.
The placement of the water separator is determined by the size and structure of your room.
How to use the geothermal water separator:
1. The water supply flow of each room or area can be controlled by a separate channel, and the temperature of the heating room will be reduced if any of the rotor valves on the floor heating water separator are closed by half.
2. Manual exhaust valve, if there is poor heating and gas blockage during heating in winter, the user can use the exhaust device to manually discharge the gas in the floor heating pipeline to ensure the normal circulation and flow of hot water.
3. There is a filter on the front end, and the user regularly or irregularly removes the filter screen at the lower end of the filter during the annual heating period for cleaning and installs it to ensure the cleanliness of the water pipe. After the heating is over, the pipe network should be flushed with clean water.
4. If you are away from home for a long time, you can use the main valve of the water separator to reduce the circulating water, and you must not close it all. If there is no heating in the room throughout the winter, the water in the pipe should be blown out.
5. Observe whether there is water running and leakage in the home in the early stage of heating, and if the heating water separator is found to be leaking during the heating period, the following emergency measures can be taken: close the water supply and return valves of the heating water separator, and immediately notify the maintenance personnel or property company.
Installation principle:
1. It is convenient for coil and pipeline design. >>>More
You are willing to only install it in the living room, but it is best to install it fully, there is a floor heating water divider, the room can be closed all the time, if you don't install it now, it will be very troublesome to add it later The position of the water separator is set according to the location of the entrance pipe, the closer to the entrance pipe, the better, the water resistance is small, which is conducive to circulation. When the geothermal water separator is exhausted, the coal rot shouting gas hose is connected to the water separator release valve, and the other end of the hungry lead field hose is placed in the bathroom floor drain, and the current water separator air release valve seals the exclamation limb very well, and there will be no water leakage when exhausting.
The principle of installation that is generally in the bathroom is to press the nearest place where the main water is returned, and it is likely that your main water is given, and the water return is not in the bathroom, which may also cause the bathroom but the pipeline is long, which affects the heating.
Generally, they are installed in the washbasin cabinet. There is less need to make a water separator cover, and there is also a special water separator cover. >>>More
You can try to use some tools to twist it, and normally, the feng shui qi is not easy to break.