-
Anonymous users2024-01-241. Before installation, check whether there is any blockage such as mud and sundries in the sewage pipeline, and whether the installation ground is level.
2. Determine the center of the sewage pipe and the center of the toilet outlet, and adjust the wall within the error range.
3. Determine the installation position at the bottom of the toilet. Dry installation: Use an electric drill to drill the installation holes and embed the expansion screws. Wet and dry installation: Use an electric drill to drill the installation holes and embed the expansion screws.
4. Install a sealing ring on the sewage outlet of the toilet, or put a circle of glass glue around the sewage pipe, put the toilet according to the position of the line, and adjust the level.
5. Dry installation: screw on the screws and seal a circle of white cement around it. Wet installation: Adjust the landscaping sealing surface.
6. Install and debug the water tank accessories. Depending on the situation, some need to do this first. In addition, some toilets are difficult to debug if they are found to be abnormal after installation due to their emphasis on aesthetics (although this situation is not much, but it has also been encountered), it is recommended to test the water before installation.
7. Install the toilet cover. Depending on the situation, some need to be done first.
8. After installation, it should wait for the white cement or glass glue to solidify before use, generally 24 hours.
When installing, the toilet is mainly from the aesthetic point of view, and the vast majority of users also require this, but it should be noted that many brands of toilets are allowed to have a certain distance from the wall (different manufacturers have different requirements), mainly from the cleaning and maintenance convenience considerations. Many brands of information have this description, so I would like to add it here, but from the perspective of the on-site installation effect, it is better to lean against the wall as much as possible, especially for those toilets with a flat surface against the wall, if it is not against the wall, it is too ugly.
As long as the sanitary ware in the water tank can be used normally, it can be opened 24 hours a day. Water the toilet will only be flushed when it is flushed.
It's best to buy a sleeper, if you don't have a sleeper, try to eat less and drink less water, eat more and drink more water, and if you drink too much water, you will be in trouble.
The power supply of a notebook is generally 65W, which means that the maximum power of a notebook generally does not exceed 65W. Calculated at 65W, 65W*24H=1560WH, that is, 1560Wh = kWh (kWh), the maximum power consumption per day.
Can't you use it? Use is inevitable. 24 hours you think the time period, it should be fine.
Toilet dredging is generally about 60 yuan for bathroom dredging. Kitchen sewer dredging generally costs 80-100 yuan, because dredging the sewer requires a dredging machine... >>>More