-
Anonymous users2024-01-24This is required by the design code, and the main purpose is to prevent moisture from seeping into the walls of the bathroom and into other rooms.
In the ordinary wall material, the concrete itself is very waterproof, especially the dense concrete that is integrated with the overall pouring of the floor slab, which has strong impermeability.
If brick masonry is used, it is easy to seep water at the base of the wall.
-
Anonymous users2024-01-23On the floor of the bathroom, to build the root of the wall, first pour 150 high with concrete, the thickness is the same as the thickness of the wall to be built, and then build a brick wall after pouring to make the bathroom waterproof layer, these are the meaning of what you have to ask.
-
Anonymous users2024-01-22The high concrete barrier is mainly to meet the requirements of floor waterproofing, that is, to turn over the concrete flange on the wall to prevent the leakage of the bathroom wall.
Eighty percent is the problem of waterproofing, what water pipe bursts, first of all, what water pipe of your water pipe, if it is PPR or PVC, it is unlikely to leak, the most likely is Rifeng pipe, many people will think that Rifeng is not very good quality? Yes, the quality is indeed very good, but his joints are sealed by rubber pads, and Rifeng pipes are mostly used to make hot water pipes, and they will definitely leak after a long time. It is impossible to see anything when the water stops, because once the wall is soaked in water, it is difficult to dry, and now there is a test of water pressure machine vibrator can see the leakage without water leakage, and the waterproof must be redone without leakage, because it is most likely that the waterproof of the ground is not done well, because the ground is not spoiled with water is even the wall 20 cm together, it is likely that the water for showering seeps into the mortar layer under the floor tiles, and the wall leaks around it. >>>More
Plain concrete masonry or structural reinforcement can be, the width is the same as the width of the wall, the height is like 200 as you said, and the masonry is built along the partition wall around the bathroom, if the concrete wall does not have this problem. This is a building waterproofing requirement, and has nothing to do with the structure.
Whether the water pipe is leaking or not, buy a small water pressure detector and you can judge it under the test. >>>More
Okay, because its function is waterproof, for example, if the kitchen is on the upper floor, there is also the air conditioning panel, which is reversed.
1. Determine the elevation of the ground drain, install the fixed cushion slope finding, lay the leveling layer, seal the waterproof additional layer around the floor drain, lay the waterproof layer, store the test, lay the surface layer, and place the floor drain grate; Pouring slab holes: >>>More