-
Anonymous users2024-01-24It is normal that the tile antifouling is not done well, which causes the tile to absorb color, causing color change, and there is a long time ago permeable bricks will also appear in this situation.
For the sake of beauty, you can only change it all, for the sake of practicality, find a master to suck it out with a suction cup and make up two pieces.
The way to cure both the symptoms and the root cause is to reattach the two upturned bricks.
It is the wall tile and the floor tile, the wall tile will have a hollow sound, depending on the actual situation, such as more than 50% of the area is empty, this brick should be replaced, the floor tile should not be empty, such as more than 20% of the area to change! It doesn't matter if it's just a line at the joint, the master can also use cement slurry to remedy it!
One. Remove caulking white cement along the edges of the tiles and carefully remove the damaged tiles with a small chisel. If the surrounding tiles are firmly pasted and you don't want to replace all the surrounding tiles, you can use a glass cutter to carve the middle of the tile, chisel the middle part of the tile first, and then use a sharper steel chisel to slowly repair the broken porcelain blocks around the edge.
You can buy your own materials and paste them back on, and paste the tiles on them with home taxi tile subsidy glue (TB is there), and the construction is very simple.