The phone accidentally fell into the toilet today, and he took it to the repair shop to repair it, a

I read the landlord's post and the post of the person who replied to the post, I feel that you are all cups, the first mobile phone can not be cleaned with water after entering the water, but to be cleaned with regular isopropyl alcohol, it is best to use ultrasonic cleaning, of course, there is no ultrasonic toothbrush can also be, as long as it is cleaned, it is easy to do, the next thing is to blow dry, after drying, use the ammeter to power on to see the current reaction of the mobile phone without pressing the boot button, mainly to see if there is leakage, if there is, see how much, if there is not much leakage, it is not good to repair but does not affect the use, If there is a lot of leakage, the motherboard should have a heating phenomenon. Of course, if there is no leakage, then you can directly press the power button to see the power on current response, if the current swings but does not turn on, you can judge the mobile phone fault according to the current swing situation, of course, after all this is done, your mobile phone can be turned on normally, then it will be good. It's just that the backlight has an impact.

I'm the last thing I want to do is a job like the landlord! It may not be possible to do it well for a long time, not to mention that it is not easy to repair a mobile phone——— hey, it is not easy to repair a mobile phone! Let's get down to business!

I usually put the motherboard in the water to clean the smell first, (put the mobile phone in the water without power, there is nothing wrong with the mobile phone itself), and then take it out of the water, brush it in the alcohol (this can prevent the oxidation of the motherboard by water), and then dry it with an air gun (a professional maintenance tool used to repair the mobile phone), so that you can add the power supply to see the current reaction, what is wrong! Generally, if the backgammon is really broken, it is really not easy to repair, because the motherboard is sealed, and it is basically disposable! If it's broken, it doesn't have to be repaired, and it's even harder to repair!

Oh, that water is not water, it is washing water, used to scrub the circuit board, it does not contain water components, but you can take the water away, I don't think it's good to put it to dry, you have to use an ultrasonic cleaner to wash out the water in the board, otherwise the water remains in the board, and it is easy to burn the motherboard when you power on, he washed the water on the board, and put it to dry the water in the board, but this is not correct, if the water is not dried in time, it will rust the lines in the board, so your phone will really be scrapped, I repair the water machine is generally repaired within 1 hour, you can do it, you can't be scrapped, he said to wait until tomorrow to see if it's good, that's his luck,

It must be wrong! He should clean you up with alcohol! Instead of washing it clean.

Then help you dry! Check again to see if it's powered on! It's to use maintenance tools to check the electricity!

After falling into the water, I didn't dry it in a mess. It should be repaired in a regular shop!

I'm a phone fixer, and it's the right thing to do, but you should rinse it with clean water as soon as you pick it up from the toilet.