The anti theft door lock is rivet fastened how to replace

Updated on Security door 2024-08-23
6 answers
  1. Anonymous users2024-01-24

    How to replace the anti-theft door lock: 1. First of all, remove the screws on the door, remove the panel of the door lock and put it aside.

    2. Secondly, remove the two screws that fix the lock cylinder and take out the lock cylinder.

    3. Then insert the new lock cylinder and fix all the screws well.

    4. Install the new lock cylinder according to the original position, be careful not to install it in reverse, then tighten the fixing screws, and check whether the lock cylinder can be used normally with the key.

    5. Install the front and rear shells of the door lock back to their original position according to the corresponding vacancy.

    6. Insert the key to test whether the door lock function is normal. If it can be used normally, the door lock will be replaced.

  2. Anonymous users2024-01-23

    The rivets can be removed with a suitable screwdriver.

    Replacement steps for anti-theft door locks:

    1. First of all, unscrew the door lock housing screws in the car. (These two screw positions, one on top and the other on bottom).

    2. After unscrewing the two screws, the front and rear fixing plates of the door lock can be removed.

    3. Then unscrew the fixing screws of the keyhole and remove the keyhole housing.

    4. Find the fixing screws of the lock cylinder, which are generally located in the opposite direction of the keyhole.

    5. Unscrew the lock cylinder fixing screws and pull out the old lock cylinder.

    6. Install the new lock cylinder according to the original position, be careful not to install it in reverse, then tighten the fixing screws, and check whether the lock cylinder can be used normally with the key.

    7. If there is no problem with the new lock cylinder, you can reinstall the keyhole shell.

    8. Assemble the front and rear shells of the door lock back to their original position according to the corresponding vacancy.

    9. After installing the shell, insert the screws, screw the upper and lower screws back to their original position and tighten them.

    10. Insert the key to test whether the door lock function is normal. If it can be used normally, the door lock will be replaced.

  3. Anonymous users2024-01-22

    Use a hand drill drill bit to knock it off, and you must pay attention to the steel rivets that must be used when reinstalling, and the removal method of the lock cylinder of the anti-theft door: remove the two screws on the handle indoors, and then remove the buckle of the lock, the screw that fixes the lock core is the screw that we use at night, and the lock core can be taken down.

  4. Anonymous users2024-01-21

    Knock it off with a hand drill bit, and be sure to pay attention to the use of steel rivets when reinstalling

  5. Anonymous users2024-01-20

    I don't understand this common sense and still want to change the lock by myself? Will you use a riveting gun? Get someone to help!

  6. Anonymous users2024-01-19

    Make a phone call to the lock agent, isn't it all the problem? My own family is also to call the group of anti-theft door lock agents, the service attitude is very good, all at once.

Related questions
How to replace the anti-theft door lock
8 answers2024-08-23

If you feel more comfortable changing the lock cylinder, you can change it yourself. Of course, it is still necessary to buy a good lock cylinder, which is of good quality and performance (it is recommended to use a C-grade lock cylinder). Then I came back and changed it myself. >>>More

How to replace the lock cylinder of Panpan anti-theft door?
4 answers2024-08-23

1. Remove the handle, 2. Remove the lock protector that protects the lock cylinder 3. There is a screw in the middle of the lock body on the side of the door leaf, and the lock cylinder can be taken out after removal (some types of lock cylinders can only be taken out by turning the key a certain degree).

After the renovation, how to replace the anti-theft door lock?
7 answers2024-08-23

I don't know what kind of lock it is, how can I tell if it's an AB lock? The security door of my house was left by the previous house, and it looked good, so I didn't change the door.

How to replace the lock cylinder of Wang Li anti-theft door, how to solve the problem of unlocking a
2 answers2024-08-23

Now the locks are separated by the lock cylinder, that is, you only need to change the lock cylinder, as for the unlocking is not in place, that is, the lock cylinder is not installed, and the lock cylinder shrapnel is not the right lock cylinder gap! There are screws on the side of the lock to adjust, loosen a little, and then knock it back and forth a little, test the sensitivity with the handle, and then use the key to open it, and then tighten the screw.

How to replace the anti-theft door lock is a complete set of changes, not a change of lock cylinder,
2 answers2024-08-23

This kind of lock is difficult to explain clearly, the lock with the handle, this kind of lock has three parts, the lock cylinder, the lock body, the panel, if there is a heaven and earth rod, the lock body is difficult to complete alone, and it is even more difficult if you have no experience.