-
Anonymous users2024-01-24Dude, that outlet valve can only be unscrewed after the tank is removed. If the water tank and toilet are enamel-connected, then there are screws in the middle of the outlet of the outlet valve, and they can be taken out as long as the screws are loosened. (Figure 1).
The water outlet valve is installed in the water tank with a screw ruler wire, and the split is to be disassembled at the bottom of the water tank and tightened with a large plastic Ling Xingming nut. Zhidong sanitary ware.
Follow the steps below to install the tank drain kit.
1. Remove the upper part of the drainage kit first for installation. >>>More
When installing the toilet tank inlet kit, the spike base and nut of the inlet valve should be removed first. Align the inlet hole of the tank and insert it into the lower end of the inlet valve. Attach the plastic gasket and nut and tighten it firmly. >>>More
<>< give me a picture of the potato branch in your hand, can you understand it, I don't understand, I don't understand, I don't understand,
You can change to a new one, and now there are discounts on Double 11, and Tejieer is good.