-
Anonymous users2024-01-24Solid wood particle board is a type of particleboard. At present, the two big brands in China are Daya and Lushuihe. Daya is generally used for wardrobes and cabinets, because the quality is stable and environmentally friendly, so the cost is high, and only a few brands of furniture are large.
Like the top solid wardrobe, Beijing Yifeng and so on. The dew river is generally used for more cabinets, and the more well-known is Oppai. The scientific name of Daya substrate is directional homogeneous particleboard, which is made of fast-growing wood, tree branches, etc., cut into sheets of uniform size, generally 3mm7mm, after drying treatment, it is paved and pressed in different directions.
So theoretically speaking, high-quality solid wood particle board has better load-bearing capacity, nail holding force and moisture-proof performance than solid wood. Both at home and abroad, it is the preferred material for panel furniture. However, due to the uneven quality on the market, coupled with the inferior particleboard used in some previous veneered furniture, it has led to consumer rejection of particleboard.
In fact, the quality of many big brands of particleboard is relatively stable, and there is no problem with the environmental protection index, and even some brands of furniture have vigorously promoted E0 grade solid wood particle board, playing an edible environmental protection standard, far beyond the national standard, to the European standard. It's just that the price point may also increase.
-
Anonymous users2024-01-23The so-called solid wood particle board is a board made of pellet pressing, which is better than the dew river board, but it is better than the particle board, the particle board has basically been eliminated, and now the MDF and solid wood particle board are mostly used, and the MDF should be used if the MDF is used.
-
Anonymous users2024-01-22There are all solid wood, sandwich board, moisture-proof board (also called solid wood particle board, particle board).
-
Anonymous users2024-01-21Particleboard and solid wood particle board are actually a kind of board, wood-based panels.
According to your own conditions, particleboard has light weight, uniform material, good heat insulation and sound absorption, and high strength compared with solid wood; The solid wood is not easy to deform (need good process treatment), strong and durable, natural texture, has good moisture absorption and air permeability, is beneficial to human health, and the particleboard is made of wood chips, mixed with glue in it, and the environmental pollution is greater. Therefore, it is better to be solid wood, but the price is more expensive. Today's panel furniture is generally particleboard, which is also to save resources!
Hello, the raw materials of particleboard are not completely crushed into fibers, but crushed into granules, which are generally called shavings, and then glued and pressed; MDF is made by completely crushing wood raw materials into fibers and then gluing them; The solid wood particle board is a kind of wood-based board that is processed by special equipment with small diameter wood, thinning wood, wood core, bark, branch wood, etc., and the surface core layer planer is crisscrossed and oriented paved by drying, sizing and special equipment, and then formed by hot pressing.
At present, there are roughly five kinds of boards in China's home decoration market: MDF, particleboard, blockboard, plywood, and solid wood integrated board (finger jointed material). >>>More
In terms of moisture-proof performance, MDF expands when exposed to water because the raw materials are all very fine powders and fibers. Particleboard, on the other hand, retains more of the natural structure of the wood, and the expansion rate when exposed to water is only 8%-%10The internal structure of particleboard is granular, and the medium density is powdery, so particleboard has a stronger nail grip force than MDF. >>>More
Solid wood multi-layer boards are relatively environmentally friendly. The use of liquid glue is avoided in the forming process of the panels, and formaldehyde is known to be present in liquid glue, so multi-layer solid wood panels are more environmentally friendly and healthier than plywood. View the original post