-
Anonymous users2024-01-24Resolution: BAI
Case: The aftertaste of the smoke machine may be.
It may be that the valve effect of the smoke machine with its own right is not ideal, then it is recommended to add a special check valve to the smoke pipe and flue, or it may be that the flue has been changed upstairs, and the exhaust is not smooth. This is an upgraded product of the check valve, which comes with a diversion groove and uses the principle of aerodynamics to produce a pull-out effect in the flue.
-
Anonymous users2024-01-23Reason 1: The smoke exhaust pipe and the common flue are not properly sealed.
Solution: If the smoke machine tube is under the ceiling, you can consider wrapping it tightly with transparent tape, or using glass glue and sealant to destroy the dust seal. If the smoke machine pipe is on the ceiling, there are two situations, if it is an integrated ceiling, remove a small piece, and then seal it with glass glue, and if the ruler is a gusset ceiling, then a part of the ceiling must be removed to be glued.
> reason 2: The exhaust check valve of the range hood, the two semi-circular movable baffles of the check valve, open when exhausting, and close when stopping, but due to the accumulation of greasy, the activity of the baffle is limited, or even not opened, and the fume cannot be discharged.
Solution: Change the check valve or clean the check valve.
-
Anonymous users2024-01-22My family is like this, specifically plugged the original hole, opened a new hole, installed the best check valve, or useless, has not ruled out the check valve problem like you, and now I suspect that there are loopholes in the flue, really sad, the kitchen usually closes the door, when cooking, the kitchen knife puts all the items on the bowl are sticky, and now I don't know how to do it.
-
Anonymous users2024-01-21I'm like this at home, and it's useless to install two check valves, and you can solve it.
The check valve installed on the flue on some floors does not pour smoke, (that is, it does not smell the smell of other people's cooking) and some pour smoke. This is determined by the suction of the flue, the direction of the wind, the height of the floor. When cooking downstairs, the hot air drove the check valve upwards and opened it to smell the smell of oil smoke. >>>More
It is easy to be clogged by oil sludge, and it is not easy to let the smell of other people's kitchens enter your home.
1. Enlarge the original smoke exhaust hole by a small part, and the check valve can be easily put in. If there is no flue hole, a 170mm*170mm hole can be opened. >>>More
Where is the best place to install a check valve?
1. Do not install on the flue mouth. >>>More
It must be needed, otherwise it will be a lot of troubles in the future. However, it stands to reason that the general real estate will be installed when it is built, if it is not, you can directly buy one and install it at the flue mouth position, which is the best way to prevent the backflow of oil smoke.