What to do if the toilet tank is broken, toilet tank repair tips

As a necessary device for thousands of households, the brand types of toilets on the market are also relatively complex and diverse. However, no matter how good the Taoming family brand is, no matter how good the quality of its products is, no matter how long it is used, there will still be some problems more or less.

1. Repair method of toilet tank leakage.

1. The toilet tank is leaking, generally we open the lid of the water tank first, and observe what position the water scoop is in when the water inside the tank is full. If the water inside the tank is full and the tank is still flooding, then the tank will definitely leak. At this time, the fault appeared on the water scoop.

The ladle can be replaced, or repaired, after which it is better to lower the position of the ladle.

2. If there is a problem with the water scoop, then check the outside of the water tank, there is a stainless steel hose interface on the outside of the water tank, and the water in the water tank generally enters the water tank from here. Check whether the water pipe is damaged or not tightened. After that, targeted repairs will be carried out.

3 In addition to the above two possibilities, there is also the possibility that the water tank has been hit by an external force, resulting in the problem of damage to the water tank, resulting in the leakage of the water tank, this kind of problem, the water tank needs to be repaired, when repairing the crack, you can use some glue to repair the water tank, but this method can only repair the problem of slight cracks. The crack is too large and can only be repaired or replaced by a professional.

END 2: The water tank does not enter the water.

1. The toilet tank does not enter the water, which may be because the pressure of the tap water is not large enough.

2. There is also to check whether the filter screen out of the inlet valve is blocked by the filtered debris. If yes, just get rid of the clutter. Remember to clean up the debris from the filter regularly in the future.

3. In addition, check whether the sealing ring inside the water valve body has fallen off, or there are debris such as sediment. If the sealing ring falls off, reinstall it and remove the debris.