How to do the smoke blocking vertical wall at the aluminum square ceiling

Frock? Smoke barriers are only used in tooling. And if you don't hang the ceiling, your beam itself can play a role in blocking smoke. So very little is done in this case. If you really want to do it, the smoke barrier vertical wall profile is folded separately and nailed directly to the floor slab.

OK. 1. LED lights can be embedded between the aluminum square pass and the aluminum square pass. 2. The aluminum square can be slotted and put the LED in.

Usually the manufacturer does the longest six meters, if the eight meters are made into four meters, the middle can be connected with a joint, the U-shaped square is generally fixed with a windproof bone, and the aluminum side of the profile is a hanging piece

Of course, it is important that it is easy to be damaged during transportation without packaging.

Special care should be taken not to wash with hard objects or cleaning balls, which will leave some scratches on the shiny panel. Damage to the aluminum connecting plate, at this time if it brushes or nano rollers are very good, if it is the effect is not very good. Deep cleaning should be divided into two times, the first time scrub with a soft towel dipped in water, the second time with clean water, open the window to ventilate and dry naturally.