-
Anonymous users2024-01-24As you said, the low height of the standpipe is a significant cause of overflow.
The flow of water in a short period of time after the sink is impounded, and the water does not have time to drain away from the sewer pipe, it will overflow upward, and there is a gap in the sewer hose inserted into the PVC sewer pipe, and the water will overflow from there.
There is no specification for the height of the standpipe, which is generally based on experience, but the installer leaks to do one important thing: glue and seal the gaps between the pipes! After the glue is sealed, no matter how much water is released, it will not overflow.
You hurry up and find someone to make up for this, the glue must not be wet, it must be dried.
-
Anonymous users2024-01-23Well, that's it, you don't need to. Because this kind of pipe is best replaced every few years, for fear of aging and leakage.
-
Anonymous users2024-01-22That's right.
There should be a screw corresponding to this position, it is recommended to unscrew it first, take off this thing as a whole and apply glass glue to the position of the black glue, and then install the screw, which will be stronger and more waterproof.
The faucet and sink are not glued together, the lower part of the faucet has a screw, which is used to connect the sink, if it is loose, you just need to tighten the nut, and you see if the rubber pad is broken, which is also the reason for loosening, with a good rubber pad, it is not easy to loosen.
The ash pipe itself is PVC, and it must be glued with PVC glue, which must have been installed before without glue. >>>More
Because the sink water pipe is connected to the main sewage pipe, air will enter the sink drain pipe while discharging sewage, and because the PVC pipe is light and hard, the air will reverberate louder when it enters. This is normal.
Hello, kitchen sink drain pipe installation first step: install the drain filter basket. >>>More