-
Anonymous users2024-01-24Zhulong TJ-242 SBS elastomer modified asphalt waterproofing membrane is made of SBS modified asphalt with an appropriate amount of additives as the base material, polyester (glass fiber tires, composite tires, etc.) as the carcass, aluminum foil, non-ferrous ore, PE film as the overlay, and manufactured by calendering and other processes. It is suitable for waterproof, moisture-proof, seepage-proof and asphalt roof maintenance and renovation projects of roofs, basements, pools, caves, reservoirs, cold storages, tunnels and water conservancy projects of industrial and civil buildings. It is especially suitable for waterproofing buildings in cold areas and with frequent structural deformation.
Product parameters. Product model, recommended grade
Scope of application. It is widely used in waterproof projects such as roofs, basements, and toilets of industrial and civil buildings, as well as waterproof and moisture-proof projects such as roof gardens, roads, bridges, tunnels, parking lots, and swimming pools. It is recommended to choose polyester tire products with excellent tensile performance for projects with large deformation, and relatively economical glass fiber tire products can be used for other buildings.
-
Anonymous users2024-01-23The waterproofing membrane is the roof waterproofing, and you want waterproof coating for this.
-
Anonymous users2024-01-22Not good, no effect. It is recommended to use waterproof paint.
Suppression may not be tried. The inspection method is divided into two steps: do not use water on the ground first, after 15 days, if the wall is dry, it means that the ground penetrates into the wall, and the amount of work is relatively small, and the wall is wet after 15 days, which means that the dark water pipe has a dripping phenomenon, which is troublesome.
Is the leaking water hot? If not, ask your downstairs neighbor to open the bathroom ceiling and check for leaks in your house's sewer pipes (on the roof of your downstairs' neighbor's bathroom).
In most cases, there is a leak in the bathroom on the fourth floor, and the waterproofing is not done. In a few cases, more than 5 layers are leaked. Find a property, or ask an insider to look for it layer by layer.
Then you have to see if there is a problem with the water pipe buried in the wall or under the bottom surface, if there is a problem with the water pipe, the repair must knock out the tile to repair the water pipe, and then restore it. If the gap between the floor tiles in the bathroom leaks, then you don't need to knock off the tiles to solve the problem, and you can directly use the Shu Yu waterproof kitchen and bathroom special invisible waterproof liquid to solve the problem. You don't use the bathroom, but whether the bathroom floor is too watery during the renovation also depends on it, because if there is water on the bathroom floor, the water may sometimes leak through the gaps in the tiles and cause water leakage underneath.
If the leakage is small, you can apply it with water, and if it is large, you should redo the waterproof layer (smash the original surface layer and re-do the waterproof layer, and then put the water to observe for 24 hours to see if the water is still leaking, and then re-do the surface layer if it does not leak).