How to make an aluminum grille ceiling to prevent smoke from the void above the vertical wall, and h

Updated on Suspended ceilings 2024-08-20
4 answers
  1. Anonymous users2024-01-24

    The smoke retaining vertical wall is installed under the floor slab or beam to form a smoke-proof partition to meet the requirements of the smoke retaining vertical wall. There are many holes in the aluminum grating ceiling, which can be divided into two parts of installation, fixed or movable installation under the ceiling, and the ceiling is blocked with non-combustible materials at the corresponding position.

  2. Anonymous users2024-01-23

    The smoke barrier must be to the floor or beam. It can be done as a fixed smoke barrier vertical wall or a roller shutter smoke barrier vertical wall, but the grille to the bottom of the plate or the bottom of the beam must be blocked with non-combustible materials, otherwise it will not meet the requirements of smoke protection. Beijing Fei Pufu.

  3. Anonymous users2024-01-22

    It is best to install the smoke wall in the ceiling, otherwise it will be difficult to install the ceiling.

  4. Anonymous users2024-01-21

    It is advisable to ask a professional to check the specific situation.

Related questions
1 answers2024-08-20

The grid lamp is a kind of illumination lamp, and the price of T5 grid lamp is not expensive. It is suitable for installation in the writing room with DU ceiling. The light source DAO is generally a fluorescent tube. It is divided into built-in and in-ceiling. >>>More

1 answers2024-08-20

The height is from the floor slab (or the bottom of the beam) to Fapford.

1 answers2024-08-20

At this height, you can do it.

Interior decoration, to pay attention to the unity of style, is not that kind of practice, good or bad depends on the overall style, however, the aluminum grille ceiling can not be oblique, that will affect the whole style. >>>More

4 answers2024-08-20

As long as it's done, it's all good-looking.

1 answers2024-08-20

In fact, the aluminum grille is the aluminum skin folded into the shape of a vertical hook, and the inside is hollow and very light