What should I do if the paint film on the surface of furniture is blistered?

The surface of furniture is generally coated with paint, but in the hot summer, the paint film on the surface of many furniture will blister, how to prevent the paint film on the surface of furniture from blistering? We have compiled some common possibilities and methods for you, hoping to help you learn to maintain furniture products. Countermeasures to solve the phenomenon of blistering paint film on the surface of furniture:

1. The wood should be dried to a suitable moisture content, and the aromatic oil or pine resin in the wood should be removed; 2. The putty and base coating should be fully dried, and then the surface coating should be brushed; 3. The voids and wood holes at the wood joint should be filled with putty, and then painted after grinding and smoothing; 4. It is best to use a clean rag to clean up the debris on the surface of the substrate, do not touch it with your hands, and the painted surface after cleaning it can be painted; 5. The construction viscosity of the paint should be appropriate; 6. Don't drag back and forth when brushing, first horizontally, then vertically, and finally straighten along the direction of the wood grain; 7. Regularly discharge the water in the compressor and install an oil-water separator; 8. Refer to the countermeasures of pinholes; 9. For slight bubbles, you can wait for the paint film to dry thoroughly, polish it with sandpaper, and then repair the topcoat. For serious bubbles, first pick up the bubbles, carefully polish and clean them with sandpaper, and then repair them layer by layer according to the coating process. Views.

The surface of furniture is generally coated with paint, but in the hot summer, the paint film on the surface of many furniture will blister, and the countermeasures to solve the blistering phenomenon of paint film on the surface of furniture:

1. The wood should be dried to a suitable moisture content, and the aromatic oil or pine resin in the wood should be removed;

2. The putty and base coating should be fully dried, and then the surface coating should be brushed;

3. The voids and wood holes at the wood joint should be filled with putty, and then painted after grinding and smoothing;

4. It is best to use a clean rag to clean up the debris on the surface of the substrate, do not touch it with your hands, and the painted surface after cleaning it can be painted;

5. The construction viscosity of the paint should be appropriate;

6. Don't drag back and forth when brushing, first horizontally, then vertically, and finally straighten along the direction of the wood grain;

7. Regularly discharge the water in the compressor and install an oil-water separator;

8. Refer to the countermeasures of pinholes;

9. For slight bubbles, you can wait for the paint film to dry thoroughly, polish it with sandpaper, and then repair the topcoat. For serious bubbles, first pick up the bubbles, carefully polish and clean them with sandpaper, and then repair them layer by layer according to the coating process.