What to do if the furniture film blisters

Pierce the eye with a thin needle, blow slowly with a hair dryer, carefully expel the air with your fingernails, and flatten it.

However, this method is useful in the short term, if you want to be long-term, use a doctor's needle and put some special glue in it.

Hello: Generally this situation should be caused by the quality of the glue or the dust between them.

You can reapply the film or have a technician handle it.

Answer: You can use this small piece of cloth to push the bubbles on the screen first, so that the contact area between you and the entire screen will become larger, and there will be no gaps to let the bubbles run away when pushing. You can also fold the cloth in half a few times when pushing, and then use its edge to push the bubbles.

How to solve the blistering of the film.

After pushing a few times, you will find that there will still be a few very small bubbles on the phone screen, and even if you push a few more times, you will still find that this bubble will not be removed, why is there such a reason? That's because there is quite a fine amount of dust in this bubble, which is a tiny bubble formed by dust, so no matter how you push it with a cloth, if you don't remove the dust inside, there will always be such bubbles. At this time, all we have to do is to remove the dust inside the bubble.

How to solve the blistering of the film.

3 At this time, you can use the tape, maybe you think of using the tape to stick the fine dust, in fact, this is the method, but we still need to do some skills when we use it. You can cut a piece of tape, and then stick it directly on the phone screen, and then pull up this piece of tape, and the stickiness of the tape can pull the film up the way.

How to solve the blistering of the film.

4. You only need a small gap, and then cut out a small piece of tape, and directly stick the dust on the screen or the film, so that you can be very effective in making the whole phone more clean and tidy, and finally stick the film on the phone, and finally you can find that many of the original bubbles are basically gone.

To clean the glass, paste the film to peel off the transparent film on the paste, and then scrape the air will not spent, wait for the transparent piece to be torn off.