How to remove urine alkali from the toilet bowl

1. White vinegar + baking soda. Take an appropriate amount of white vinegar and add a little baking soda powder, mix well, pour it into the toilet, about 15 minutes later, scrub it with a brush, and finally rinse it with water, perfect solution! In addition, we can also put the white vinegar in a bottle with a small hole in the bottom and put it in the water tank, so that the white vinegar will automatically flow out and mix in the water every time we flush, not only to remove dirt but also to disinfect.

2. Leftover Coke. You can pour the leftover cola into the toilet bowl and soak it for about an hour, because the main ingredient of cola is carbonic acid, which will react with alkaline dirt to remove dirt and achieve the purpose of cleaning.

3. Soot. If you have a smoker at home, you can collect the usual cigarette ash and add a little soot to it when removing the stubborn dirt, which can be easily cleaned up with ordinary toilet cleaner!

4. Toothpaste. Toothpaste has a certain decontamination effect, and generally difficult stains in the toilet can be solved. You don't need to use expensive toothpaste here, just the kind of toothpaste that costs a dollar.

Importance of cleaning the toilet:

Professor Yu Qingfu of Fudan University's School of Public Health pointed out that the survey found that 32% of toilets had dysentery bacilli on them. Another experiment also reported that 3,000 viruses splashed on the seat when 100 million polioviruses were thrown into the toilet. Nowadays, in most families, toileting, washing, and showering are carried out in the bathroom, and toothbrushes, mouthwash cups, towels, etc. are co-located with the toilet, which is naturally easy to be contaminated by bacteria.

The bacteria of the toilet bowl mainly come from excrement and the dirt and bacteria left on the wall of the toilet bowl due to improper cleaning for a long time.

If you can buy hydrochloric acid (which is sold in chemical products or chemical reagent stores), you can buy a bottle, flush the toilet bowl first, then wear protective gloves on your hands (can be disposable plastic film gloves), carefully open the cap, pour about 100 ml of water left in the toilet bowl (depending on the condition of the dirt), stir it with a bamboo skewer and other fine objects, and wait for 20---30 minutes. If you use a non-metallic brush (preferably a plastic brush for the toilet) and then rinse it with clean water, it will be "as bright as new". The remaining hydrochloric acid in the bottle must be tightly covered and placed in a safe place, and it must be noted that because hydrochloric acid is a strong acid corrosive liquid, and the air will produce ** smoke that is harmful to people, therefore, in the process of treatment and operation, the toilet must be kept ventilated, and the operator should be in the upwind position.

In general, if the dirt is more severe, a bottle of hydrochloric acid (concentration of 40%, 500 ml) can be used about 3---4 times.

Answer: It can be cleaned with oxalic acid and dilute hydrochloric acid solutions. Pour the oxalic acid or dilute hydrochloric acid solution into the pipe, and rinse it with a brush or water after about 20 minutes. It can also be cleaned with a dilute sulfuric acid solution.

Same method as above. If it cannot be removed, the concentration of hydrochloric acid or sulfuric acid solution can be gradually increased until the urine alkali can be removed.

The urine alkali in the toilet bowl can be removed with vinegar essence, because the concentration of vinegar is higher than that of ordinary vinegar, which is better than using white vinegar.

If you have studied chemistry, you know that urine alkali is alkaline, while white vinegar is acidic, acid-base neutralized, so it can be removed. It can be removed according to chemical raw materials, and of course I heard that cola can also remove urine alkali, and it is said that the effect is good. Landlords may wish to give it a try!

Generally, you can use toilet powder, sprinkle some on it (don't get your hands dirty, it's corrosive), wait for 10 minutes and then brush it with a long-handled brush, rinse it with water, and generally wash it once a week. If you use it more frequently, wash it 3 times a week. If it is an old toilet, you can also consider replacing it with a new one, which is not expensive if it is water-saving.

【25kg cement residue toilet toilet bathtub cleaning liquid】, copy this information rJHX1kLLS3s and open it