-
Anonymous users2024-01-241.First brush the bottom of the ground white blank Debao, this is done so that the color does not soak into all the wood grain, 2Wait for the paint to dry and remove the burr and then wipe the color, pay attention to the wiping while wiping, don't wait for the complete dry to be clean.
3.Wipe evenly and then apply a layer of varnish, 4Repeat the steps, the color is almost the same, and the final topcoat can be slightly thicker.
Note: Try to dilute the paint every time, and try to lighten the color as much as possible, not once is enough, scrub with a fine sandpaper 320 mesh, otherwise there will be obvious sand marks, and the more steps you do, the better the effect
The effect of applying the same color wood wax oil to different wood surfaces is different, so you need to try it before deciding. >>>More
The raw materials of ash wood furniture are made of ash wood, which mainly produces some relatively high-end furniture, and the price is higher than other wood materials. Here we talk about the advantages and disadvantages of ash furniture. >>>More
I am a home factory, every day to produce this kind of furniture, first depends on whether you do open paint or closed paint, let me tell you a process: 1 wood polished, 2 thin layer of Depot paint, 3 polished, 4 wipe color, wipe water color (if you do closed paint, hydrating putty), if it is open paint, do not do this process, 5 polishing, 6 spray primer (if you do closed paint, you have to spray the pores flat), open paint should be thin, 7 polishing, 8 color repair (be sure to look at the color you like Note that the color will be a little darker after the paint dries.9 For topcoat, I suggest you find a furniture factory to process it, or find a painter in a furniture factory to do a good job.
No. Linene, also known as Gris, is mainly used for base coloring, and is generally used for transparent finishing of veneer or solid wood products. In layman's terms, it is a dye that can show the pores and mechanisms on the surface of wood more clearly, and obtain excellent decorative effects. >>>More
There is no simple comparison.
Because in addition to the wood used, furniture is also related to the design, production, and process control level of the factory. >>>More