How to solve the loud buzzing sound after the toilet is pumped at home?

Updated on Toilet 2024-08-18
6 answers
  1. Anonymous users2024-01-24

    It can be solved by means of pipe silencing, adding sound insulation layers, etc.

    First of all, from the perspective of the overall design of the house before moving in, you should choose a bathroom as far away from the bedroom as possible. Secondly, some sound insulation measures should be taken for the toilet sewer pipe during the decoration to reduce the noise of the sewer between the floors. Again, when choosing a toilet, you should choose a product that has a silent function.

    Upstairs and downstairs noise affects each other and can be mitigated in two ways:

    Pipe silencing. Generally, the downspouts of commercial houses are located in the walls, which basically do not produce much noise. If the sewer pipe is not in the wall and the sewer noise is large, you can wrap the toilet sewer main with insulation material (usually a tubular sound-absorbing sponge), and then wrap it with professional soundproof plastic for fixation.

    You can also use lightweight bricks with sound insulation to cover the sewer pipes so that they can be integrated and coordinated with the bathroom wall.

    Retrofitting of sound insulation. When decorating the bathroom, you can add a layer of sound-absorbing rock wool or polystyrene board to the ceiling to dampen the sound. It should be reminded that because professional materials such as rock wool can cause certain damage to the skin, it is necessary to ask a professional company or professional to operate.

    In addition, in order to avoid being affected by the noise of your own toilet flushing, you can choose a siphon toilet with a quiet effect when buying a toilet.

  2. Anonymous users2024-01-23

    The angle valve spool is broken, and the problem can be solved by replacing the angle valve.

  3. Anonymous users2024-01-22

    There is also a problem with this water pressure! If the water pressure is high and the quality of the accessories is not very good, the sound will also appear!

  4. Anonymous users2024-01-21

    The hose of the inlet valve is hardened, change it.

  5. Anonymous users2024-01-20

    Just plug your ears!

  6. Anonymous users2024-01-19

    It is also possible that there is limescale blocking in the place where the water has entered.

Related questions
3 answers2024-08-18

Use the spirit of extermination! Old insecticide!

Or order mosquito coils, close the doors and windows, and in less than ten minutes, all the mosquitoes will die. >>>More

1 answers2024-08-18

The buzzing sound comes from the rectifier inside, since the fear of power consumption simply dismantle all the inside and replace it with LED lights, both power-saving and bright, on the basis of the same power brightness to increase to 6 8 times, now the ceiling lamp installation is very convenient, the factory is also very user-friendly, are equipped with magnets, the light board is directly sucked on the chassis of the ceiling lamp, and the line is OK.

2 answers2024-08-18

It may be caused by the vent on the roof of the main sewer pipe in the bathroom.

2 answers2024-08-18

You can close the angle valve and check whether the pressed one is not caused by not popping up, and you need to change the accessories in the water tank.

1 answers2024-08-18

The flush toilet is with a water seal, the toilet is carried by yourself, and the squatting toilet is installed on the drainage pipe, after your home is renovated, if you don't use it for a long time, the water seal will evaporate, and the smell will come up.