-
Anonymous users2024-01-24The bamboo floor can be restored to its original state if it has been blistered! And it didn't affect Ao!
-
Anonymous users2024-01-23It depends on the length of time and the species of the tree on the floor.
The bottom of the solid wood floor is paved with keels, if it is disassembled at the first time, it should be dried immediately, and then placed in a cool place to be placed neatly, shaded, and must not be dried in the sun, which will be deformed.
If it takes a long time, it will be difficult for the floor to absorb enough moisture, and it is likely to be distorted and deformed, and the paint will also fall off, and this deformation will be difficult to recover.
The most troublesome thing is to disassemble, when installing, the floor is fixed on the keel with spiral nails, so it is very troublesome to disassemble, the floor is damaged quickly, and the moisture is absorbed slowly.
If it is a parquet, it is much easier to deal with.
It's best to ask the dealer to help you take a look, they are professional and will give you good advice.
The floor should be removed immediately, because it is a solid wood floor, there is a keel underneath, so it must be removed, let the keel dry, and reinstall it after drying it upright indoors, it is strictly forbidden to use an electric heater to dry or expose it to the sun, and it is not possible to reuse it if it is deformed and warped, it is recommended that it is best to ask a professional to help you go to the scene to see.
If the floor is already wet, be sure to open the floor, stand upright in the room and dry it naturally, if it is not deformed, it can also be installed and continued to be used, if it is deformed, it can only be replaced with a new one. Be sure not to dry in the sun or hair dryer. It's best to find a professional to come to the site to take a look and make an assessment of the loss, which can be used as the basis for future claims.
In general, as long as you pay attention to the quality and maintenance of wood flooring, there will be no insects. >>>More
Get the water away as soon as possible, and then quickly disassemble the floor foundation to dry without completely penetrating the back. >>>More
Clean the surface area of the floor with water.
Check the circuit, strong or weak current. >>>More