Why is the kitchen gas alarm indicator not lit

Generally, the preheating time of the gas alarm is 3 minutes after being plugged in, and the gas detection cannot be carried out during the period; After 3 minutes of warm-up, the ring indicator (green) enters the breathing state, and the alarm enters the normal detection state.

There are two reasons why the indicator light is not on:

1. The power supply is not in good contact, and the power supply is replugged.

If the gas alarm presses the self-test reset button and there is no sound and light alarm, the power line is faulty and you need to contact the manufacturer.

If the gas alarm is turned on and the detector is preheated, the detector keeps alarming.

1. A large number of disturbing gases (smoking, drinking, a lot of perfume, gasoline, banana water, paint and other organic volatiles) in the environment, please move to clean air to test whether its performance is normal.

2. The storage time is too long, and it needs to be energized for more than 2 hours.

3. If the power line is faulty, you need to contact the manufacturer.

Note: If you can't solve it, contact the manufacturer.

Check whether the power supply is plugged in first, and also see whether the alarm circuit is normal, if it is still not lit, it needs to be returned to the factory for repair.

Contact the manufacturer, it's safer.

What brand? If it's Ojiabao's, press the self-test button and try it.

1. The power supply is not in good contact, and the power supply is replugged.

3. If the power line is faulty, you need to contact the manufacturer.

4. The storage time is too long, and it needs to be energized for more than 2 hours.

The main components of coal gas are CO, local hydrogen, alkanes, olefins, aromatics, etc. The content of CO and hydrogen in gas in different cities may vary greatly. The gas is toxic because the CO and aromatic hydrocarbons in it can combine with the hemoglobin in the human body, causing hypoxia, making people unconscious and even dying, and at low concentrations, it can also make people dizzy, nauseous and prostration.

Because the CO gas is toxic, the gas alarm is usually judged by detecting the leaked CO gas concentration.

The gas alarm is generally judged by detecting the concentration of leaked carbon monoxide gas; When the gas leakage reaches the explosion limit, the gas explosion occurs in case of fire (lighter, electrical switch, static electricity, high-frequency signal, etc.), which is prone to gas explosion due to poor ventilation in coal mines, causing great damage.

Is there really no complete solution to the threat of accidents caused by gas leaks? According to relevant experts, the use of gas leakage alarms is one of the important means to deal with the invisible killer of gas. Gas experts point out that the large amount of carbon monoxide produced by gas leaks or exhaust gas emissions is the source of gas poisoning response, such as using a gas leak alarm to get timely warning.

The kitchen gas alarm indicator light is not lit, first of all, check whether the power supply is normal and whether the switch of the alarm is turned on. If it still does not light up, it proves that the alarm is faulty and needs to be repaired by the original factory.

When decorating the integrated kitchen, it is generally equipped with integrated ceiling lights, and sometimes we encounter the situation that the ceiling lights are not lit, which will affect the subsequent use. So, what should I do if the crack culture lamp in the integrated kitchen ceiling is not lit? Next, let's take a look at Rilong Decoration.

It could be that the bulb is broken. First of all, cut off the power supply and take off the lights on both sides first. When you see the light, unscrew the bulb and replace it with a new one.

Some lamps are specially matched with lamps, and you can buy an extra bulb when you buy it in case you need it, because some bulbs are not easy to buy. When twisting the bulb, pay attention to the delay of the hand and keep it dry, although we will also lose the power when disassembling, but keep the hand dry, in the work is also more assured, there will be no leakage problem. Then replace it with a new one and you can use it.

It is because the ballast is damaged and needs to be replaced with a new one, and at the same time, it is necessary to ensure that there is no problem with the line, and if there is a problem, you need to find a professional worker to deal with it.