How to wrap and install bathroom sewer decoration

Wrapping sewer pipes can reduce the sound of sewer water and reduce noise pollution, and wrapping them is a good way to do it. As for how to wrap it, there are the following methods: Normally, they are built with bricks and cement. If you don't want to, there are other ways to do it. >>>More

Normally, they are built with bricks and concrete, but if you don't want to, there are other ways to do it, such as making a fake tree. Make a decoration with wood, but no matter what you do, it is best to leave the inspection opening, otherwise there will be more trouble in the future, and the shape of the bag is also diversified.

Although there are more and more hardcover houses on the market, rough houses still account for a large proportion and decorate by themselves. >>>More

1. Use cement bricks to build up some places with red bricks, this is the work of the bricklayer, that is, the master of the bricks, first wrap the pipe with cement bricks, and then paste tiles on the cement bricks, which can achieve the effect of integrating with the wall tiles, and can perfectly wrap the pipe, you can first wrap the pipe with soundproof cotton, and you can also fill it with styrofoam at the gap between the pipe and the gray brick to play the role of sound insulation, which is durable and durable, the disadvantage is that the gray brick is thicker, and after pasting the wall tiles, it will be much thicker than the original, and it is more bloated. It takes up a portion of space. >>>More

The installation of the toilet sewer pipe must be accurate, and the socket should be glued, and all plugs must be plugged to the end. After the installation, the hole through the floor slab should be carefully filled with cement mortar to prevent water seepage in the future. After the water pipe is ready, the reserved water nozzle should be wrapped to prevent the cement from falling.