How to remove and clean the fan blades of the general kitchen exhaust fan?

After rotating the disc in the middle of the fan blade counterclockwise and removing it, hold the fan blade thumb with both hands against the shaft in the middle, pull the fan blade outward, to use force slowly, do not use brute force, do not need tools at all, after washing, it is very simple to align with the card slot, I wish you success.

Step 1: Gently unplug the power supply of the exhaust fan, so as to achieve electromechanical separation, and be careful when unplugging the power supply.

Step 2: Dilute the neutral detergent with a small amount of warm water or prepare a little light soapy water, if there is an oil stain, use hot water and dish soap, add a little more dish soap, here must use hot water.

Step 3: Loosen the front and rear screws and gently remove the back cover of the Masano exhaust fan.

Step 4: Unplug the wiring of the exhaust fan, remove the filter and the back cover together, and don't touch them together.

Step 5: Put the filter and back cover into the container, wash for 10-15 minutes, then change to clean water, do not immerse the small motor in water, and do not rinse the small motor with water.

Step 6: Wipe the cleaned fan blades and inner wall with clean water.

Take a screwdriver to loosen the screws and remove them, the screws are very small and need to be carefully found.

It can be cleaned with dish soap...

Works great.

No need to dismantle. Directly with hot alkaline water, scrub.