-
Anonymous users2024-01-24First, spray an anti-mold cleaner such as Al Hao Anti-Mold Cleaner 2800 on a brush or sponge to clean it thoroughly and thoroughly clean the mold and ash on the wooden frame. Wipe down any mold and let it dry in the natural environment (about 15 minutes).
After 15 minutes, the wooden frame is dry, sprayed with a spray gun (professional anti-mildew agent for bamboo, wood and rattan), the pressure of the spray gun is adjusted around the right, considering that the wood has become moldy, the dose should be increased, pay attention to the control of dead ends, be sure to spray all of them, as long as all are sprayed, the moist solid wood is not easy to grow mold in time. It will form a protective film on the surface of the wooden frame, and the mechanical sterilization will not seep or wander, and will not be consumed by microorganisms. At this time, wait for the wooden frame to dry a little before packaging, to reduce the chance of mold again.
-
Anonymous users2024-01-23I myself and several family members are engaged in the furniture industry, and I know a little about your problem, and the long white hair is because of mildew.
The suggestions are as follows: 1. Doors and windows should be opened frequently for ventilation when the room is damp.
2. Lay a layer of waterproof and water-absorbing items under the furniture, such as: broken cotton wool and other items 3. After placing it in a cool and ventilated place to dry, paint the furniture. The main purpose of furniture painting:
One is to prevent moisture and insects, and the other is to be beautiful, and the furniture is likely to be damaged by mildew.
-
Anonymous users2024-01-22Dry it first, and then wrap it completely with a better lacquer, so that it won't grow hair if you don't let the air moisture in.
-
Anonymous users2024-01-21Do you live in a basement at home? Is there still mold this season? Move out to dry, strengthen indoor ventilation, and open windows for ventilation.
Solid wood furniture is characterized by environmental protection, but the disadvantage is that it is soft and easy to scratch. >>>More
The wooden furniture has been deformed, and there is not much that can be saved, but you can take a look at the maintenance tips. >>>More
Solid wood furniture burn mark repair:
Placing hot water vessels directly on the surface of solid wood furniture will leave white round scars on solid wood furniture. Generally, it will be removed as long as it is wiped in time. However, if the burn marks are too deep, you need to gently rub them on it with ordinary iodine wine, or apply some petroleum jelly to the burns, and after two days, wipe them with a soft cloth to remove the burns. >>>More
Wardrobe, furniture, wood and other formaldehyde concentrations are basically higher, with a pungent taste, the weather is hot, when the tide is up, formaldehyde will volatilize from the depths of the material, the formaldehyde concentration at this time will be higher than usual, it is recommended to buy a household formaldehyde detector, It is recommended to enjoy this brand, in addition to measuring formaldehyde, you can also measure benzene and other polluting substances, the dial is directly read data, formaldehyde concentration is directly displayed, temperature, humidity, etc. >>>More
1. Take out the items in the furniture of the insects first, and put them in the sun to dry if they can't be cleaned; The furniture should be wiped several times with disinfectant, and thoroughly ventilated and dried after wiping; For wood furniture that has been damaged by moths or termites, a small amount of insecticide solution (dichlorvos) can be dropped into the moth-eaten holes, or it can be pounded with sharp peppers or peppercorns and stuffed into the moth-eaten holes. 2. Apply paraffin oil to the insect moth, and apply it for 10 days. However, it is important to remember that tableware such as cabinets cannot use pesticides and paraffin oil. >>>More