What to do if the kitchen sink drain is blocked

Updated on Kitchen 2024-08-31
3 answers
  1. Anonymous users2024-01-24

    The kitchen sink drain is blocked, and the solutions are as follows;

    1.Usually, the sink is mostly clogged because of the accumulation of debris at the U-shaped bend of the sewer pipe, resulting in poor drainage, if it is a sewer pipe with a sewage screw, remove it directly (to prevent staining the cabinet, it is best to pad a sewage basin at the bottom), after removing, dredge it with iron wire on both sides, and it should be solved smoothly.

    If it has not been solved, it may be necessary to remove all the sewer pipes, remove all the plastic connections, rinse them, and reassemble them, which I believe will not take more than 30 minutes to complete.

    2.The kitchen sink drain pipe is often blocked by greasy debris and vegetable residue, before dredging, you can first introduce a pot of boiling water into the sewer pipe, and then use a rubber pipe hook to extend it into the sewer pipe to remove the debris.

    If you live on the first floor, it may be a pile of fallen leaves or silt.

    3.Prepare a rubber pipe, not too long, as long as it can connect the tap water tap and the sewer pipe, insert one end of the pipe into the mouth of the sewer pipe, plug it tightly with a worn rag or towel around it, fix the other section of the water pipe to the water pipe, and then open the water faucet to the maximum, flush for two or three minutes, and the sewer pipe can be dredged.

  2. Anonymous users2024-01-23

    1. Buy a 2-meter pipe dredge on the stall, make some bends at the head 2 cm, release water while putting water into the dredge, stretch it into the dredge at the water outlet, stretch it in while shaking, and then extend it into the dredge at the water inlet while dredged while releasing water, and repeat it several times. At the same time, it should be dredged every other week in the future.

    2. Find a wire with a diameter of millimeters, 3-4 meters long, fold it in half from the middle, and then twist it into a strand, and then bend the two heads in different directions on the side of the single end, and then stretch this end into the sewer pipe, grab the other end, and twist it in one direction while going inside, if you encounter resistance, you can't stretch it out, just pull it out, don't twist it at this time, drag it directly, some sundries can be hooked out, and you can basically dredge it several times, if, the wire hook can't get something, it's unblocked, Then the problem may not be at home, it may be that the pipe downstairs is blocked.

    3. You can find a log stick that is about the same thickness as the sewer pipe, insert it into the pipe, and then put a certain amount of water in the pool, and quickly pump the log up and down without interruption, under the action of suction and pressure, the clogged dirt in the pipe will be washed away.

    4. If the above methods are not easy to use, please deal with it with professional dredging personnel.

  3. Anonymous users2024-01-22

    What to do if the kitchen sink drain is clogged? Let it unclog with one move.

Related questions
11 answers2024-08-31

Take a piece of bamboo, preferably thinner than your kitchen drain pipe, and put it in it to make a piston motion back and forth. In this way, the debris inside will be washed away by you with a bamboo tube. If you have a P bend in the drain at home, just unscrew the lid directly.

14 answers2024-08-31

If you can't use a water plucker, you can only find a property.

6 answers2024-08-31

I have a good way, that is, I don't know if your toilet is glued, if so, remove the toilet, turn it upside down, stuff an appropriate amount of paper paper in the drain, and then insert it with a tap water pipe but block the other parts of the drain with your hands to prevent it from flowing out and use the pressure of the tap water to push the comb out. You can try.

5 answers2024-08-31

Buy a 2-meter pipe dredger, make some twists and turns at the head 2 cm, while releasing water, extend the dredge into the water outlet, stretch it in while shaking, and then extend it into the dredge at the water inlet while releasing water, repeat a few times. Or find a diameter of millimeters of wire, 3-4 meters long, half from the center, and then twist into a strand, and then bend the two heads in different directions at the single end, and then stretch this end into the sewer pipe, catch the other end, while going in and along the side of the twist in one direction some debris can be hooked out, repeat a few times can basically dredge, if your wire hook can not get something, it is dredged.

2 answers2024-08-31

1. Buy a 2-meter pipe dredge on the stall, make some bends at the head 2 cm, release water while putting water into the dredge, stretch it into the dredge at the water outlet, stretch it in while shaking, and then extend it into the dredge at the water inlet while dredged while releasing water, and repeat it several times. At the same time, it should be dredged every other week in the future. >>>More