I have an integrated ceiling press, and the sheet pressed out, the 4 sides of the protrusion have on

There are several possibilities:

The solenoid reversing valve is broken, or stuck in the descending position or leaking, or there is a tiny descending signal, look at the speed of your equipment descending, check whether the reversing valve is stuck if the speed is fast, and check the other two items if the speed is slow; >>>More

It follows the mature mold scheme and production plan for the current production of aluminum gusset, only makes very minor changes to the mold, retains the positioning device of the chamfering mold and the forming mold, and ensures the quality of the products produced.

The integrated ceiling hydraulic press is not easy to use when it is molded at one time, and there are many failures and after-sales troubles! You have to think about it. There is a brand new to be wanted.

This is hard to say, because the integrated ceiling is generally an aluminum gusset, so there really can't be a heavy object on it to deform when pressed.

The edge strip generally has a buckle that can be pried open, and then press the integrated plate, if there is no available heavy object to press the integrated plate to the line fit. The bath bomb area must be reinforced. >>>More