The titanium magnesium alloy door glass in my bathroom is broken, and I want to remove it and replac

Updated on Bathroom 2024-08-10
2 answers
  1. Anonymous users2024-01-24

    If it is an ordinary sliding door, there are two pairs of inner six screws up and down the door leaf, there are self-adhesive wool strips or leather strips need to be uncovered a little bit, in order to expose the screw holes as well, after the end can not be glued to the screw mouth can be stuffed inside, the screws on the upper pulley are pressed, don't forget to install them when assembling, and the screws that fix the pulley below can be adjusted. Stay safe.

  2. Anonymous users2024-01-23

    Hehe, if you look at both sides of the glass, there should be a bead stuck in on all four sides, and you can take it off and remove the glass.

    The cross-sectional shapes of various glass beads are as follows:

Related questions
2 answers2024-08-10

If it's because you don't want to change the pattern above, you can find a glass carving to get the same pattern, don't want any film, or something! Glass is dangerous! >>>More

1 answers2024-08-10

Scrub and the like, depending on personal preference, there are also people who choose transparent open bathrooms.

4 answers2024-08-10

The bathroom uses a titanium-magnesium alloy door, will it make a noise after a long time?Hello, see if you are using a bearing hinge door, if it is a lack of lubricating oil inside, add a little is enough, if it is a ceiling fan door, it may be that the door leaf is heavy, resulting in tilting, and then the collision and sent out the hope that my answer will be useful to you.

6 answers2024-08-10

You can use a titanium alloy door, make a wooden unilateral sleeve on the outside, add lines, so that you can correspond to other doors, and if the waterproof is not done, use the wooden door, it may seep water for a long time, and the wooden door will seep water or something. That's what I do for wooden doors.

3 answers2024-08-10

If the space of the bathroom is relatively large, and the separation of dry and wet areas is done, the water will basically not come to the door, you can choose the wooden door, because the water source is far away, the wooden door is wood after all, even if the water resistance is strong, it will still corrode and deform after a long time, and there is this hidden danger; If the bathroom area is not so large, about 2-3 square meters, the shower is close to the door, and the water is easy to splash on the door when taking a bath, in this case, it is recommended to choose a magnesium-aluminum alloy door with better corrosion resistance and moisture-proof performance, the distance is too close to the water source, it is recommended to choose a magnesium-aluminum alloy door, the magnesium-aluminum alloy door is now very good workmanship, texture, color, style, etc., can achieve the effect of the wooden door.