How do you open the ceiling of the ceiling? Thank you

Updated on Suspended ceilings 2024-08-29
5 answers
  1. Anonymous users2024-01-24

    What kind of ceiling are you? Such is the kind of 300X300 aluminum buckle ceiling. In fact, it is also very convenient to remove, that is, use a small suction cup, suck the ceiling, pull down, this small suction cup is the same as the suction cup of the small pendant on the wall, but it is larger than that.

    The suction power is also better, this small suction cup will send one for selling the ceiling, and every household will send it, which is convenient to disassemble and view something. If it is a long plastic buckle ceiling, this is a bit troublesome, because this kind of installation is not stuck on like an aluminum buckle ceiling, but with screws, and then a row of clamps, just like the installation of wooden floors is a reason. This kind is inconvenient, when removing almost the entire ceiling to be dismantled to view, this kind of demolition should be removed from the side first, and then removed one by one, very troublesome, it is best to dismantle this kind of relatively professional personnel to dismantle, otherwise it is difficult to install it back, or the ceiling will be destroyed when dismantling.

    If it is a plastic buckle, it cannot be lifted up, because it is blocked by the wooden square, and the plastic buckle is fixed on the wooden square. If you can take it out, you move the loose piece to the side, and then move it to the other end, so that there is room to take it out, and when you take the second piece, you have to pick up the screws first. In this way, move the second piece to the side first, so that it is separated from the third piece, and the same is true when you take it out, move it to one end, so that there is space at the other end, and this is how it is taken out, but you have to remember the process, because it is also installed like this, and then it depends on what kind of screw you have, if it is a Phillips screw, you are lucky, and some use that kind of pushpin.

    Some are gun nails, which is even more troublesome, you can save this money, do it yourself. It should have been installed with an aluminum buckle ceiling, and the aluminum buckle ceiling was so trouble-free. Although the price is higher than that of plastic buckles.

    But to consider future repairs. You try to remove it like this first.

  2. Anonymous users2024-01-23

    Different ceilings are opened in different ways, but they can all be opened, and the most commonly used ceilings generally have an entrance and exit in a corner of the room that they do not pay attention to, and it is generally not easy to find.

  3. Anonymous users2024-01-22

    The side of the lampshade: poke it out with your hand, there is a locking device.

    When operating, hold the lower part of the lampshade with one hand, open the lock, remove the lampshade, and replace the lamp tube.

    If the lamp is replaced as a whole, the lamp holder can be further loosened and removed.

    Notes:1Find an electrician master 2Two people must be present during the operation.

  4. Anonymous users2024-01-21

    What kind of board, is it a flat top made of gypsum board or an ordinary ceiling made of calcium silica board, if the calcium silicate board is directly pushed up, in the translation, vertical or diagonal can be taken down, gypsum board modeling top is no way, there should be a maintenance port and the like. If you have more questions, you can click on ID to consult.

  5. Anonymous users2024-01-20

    Use a saw to see a square, and some will leave a manhole behind.

Related questions
1 answers2024-08-29

One is that the light position can be moved in the direction of the threading pipe. Only in this direction to change the position, you need to try to find the conduit, open the conduit and pull the conduit out. >>>More

1 answers2024-08-29

1. The construction environment is dry and ventilated, and the effect is maintained. >>>More

5 answers2024-08-29

When there is no suspended ceiling, the bottom surface of the structural slab that looks up, and the bottom surface of the original rough concrete without any decoration is the ceiling. >>>More

2 answers2024-08-29

First, the ceiling should be designed with a "heavenly pool". >>>More

2 answers2024-08-29

Use a cutting machine to groove on the top surface, hide the sheath line in the groove and fix it, and fill the gap with gypsum powder putty.