-
Anonymous users2024-01-24Do it yourself, have enough food and clothing.
You put the drain pipe with a hacksaw blade to cut in parallel. Just leave 1 cm on the go. A flange ring was also delivered in the toilet. Put it on like this.
Then apply glass glue and smooth it with your hands dipped in water. Then go to the back of the water pipe. (The ground remains dry) and you're done. I am a professional installer.
-
Anonymous users2024-01-23Leave 200mm first, and then sawn off according to the actual situation when the toilet is installed.
-
Anonymous users2024-01-22The toilet drain can be flush with the floor tiles.
You don't have to feel bad from the perspective of feng shui, upstairs and downstairs, this location is a toilet. You said you had to eat! Especially the flush toilet, the sound can be heard up and down.
The full set is about 1500, but does not include the hall lights, the hall is a crystal lamp, the basis is to install the lamp master is the original embedded line of the master, if not the original embedded master, may have to add about 500, it is best to talk about a price, 2 masters in the past day at least 500, unless you have nothing to follow behind, otherwise, 2 people 3 days may not be finished, it is recommended to buy switches and sockets do not buy online, exchange and return is very inconvenient, And the electrician will not be so precise in prescribing the material.
The electric hammer is the most important, and the line hammer is to see if the door is end. The expansion screws are hit with 12 drills, and it is best to play deeper, and then you want to change them.
1. All can be used Diameter PVC U tube caps are bonded to the tubes.
Yes, find a decoration company, there are designers to help you design for free, water and electricity can be designed according to your requirements.