-
Anonymous users2024-01-24After the bathroom decoration is completed, the wall is generally pasted with wall tiles, if it is necessary to increase the socket, if it is a temporary available plug-in board, if it is long-term, you can draw power from the ventilation fan, bath bomb and lighting in the ceiling, and then add sockets along the wall (slotted, subsidized wall tiles) or open at the intersection of the ceiling and the wall, in the bathroom cabinet or on the side of the cabinet, but it should be noted that the toilet needs to use a socket with a splash-proof box.
If it's the ground, you have to redo the bricks, and if it's a joint, you can re-apply paper tape and re-unscrew it!
The floor of the bathroom does not need to be deliberately non-slip. Generally, when the new building is laid, it is paved with non-slip floor. Of course, this is of average quality. If you are not satisfied, you can change a batch of high-quality ones yourself.
First, the plane is swept and moistened, and the base is made with 1:3 cement mortar, with a thickness of 6 mm. The walls should be slightly hairy, but they must be flat. >>>More
Don't worry, the biggest advantage of rhinestones is that they will not damage the tiles, which is much stronger than electric hammers. >>>More
Forum netizens asked: Rough house, when cleaning the ground, the waterproof layer was broken without knowing it, the waterproofing is made of cement slurry on the bottom of the membrane, and now there is a hole with a diameter of 2 cm on the membrane, how to repair it? What materials are used? >>>More