How do you use a screwdriver to nail a solid wood floor?

1.Remove the baseboard to see how the floor baseboard is installed, now the floor baseboard is generally installed by snap-on, and the corner line is carefully removed on the floor baseboard installed by snap-on. If the floor baseboard is installed with nails or glue, it can only be pried open with a tool.

2.The process of removing the floor laminate flooring is relatively simple, using a flat-top screwdriver to pry the baseboard open, and then along the edge of the baseboard to pry the corner of the floor open and remove. When removing the solid wood floor, remove the baseboard first, and then start from the corner of the wall, and use a nail hammer to pry the wooden floor up and pull it out.

3.Wait for the floor to air dry naturally in a back-to-back manner (please clean the surface of the floor carefully), layer upon layer, and press heavy objects on top. Place it in a ventilated and dry place to dry naturally, and you can use a fan to blow it, but do not bake or expose it to direct sunlight.

4.Check the deformation of the floorAfter the floor is dry (about 7 to 15 days, depending on the humidity of the local environment and the degree of restoration of the floor), measure the thickness of the floor and check its deformation (such as distortion of solid wood, tile deformation, etc.). 5.

Slightly deformed floors can be resurfaced if they are laid in areas that are not obvious, and floors that are basically restored can be resurfaced, while floors that are slightly deformed can be sawn or laid under furniture or in areas that do not affect the overall appearance. 6. When purchasing flooring according to the amount of loss, there will definitely be some loss when dismantling and resurfacing the floor. The owner needs to supplement some flooring appropriately according to the wear and tear of the floor.