-
Anonymous users2024-01-24If you don't repair the water pipes, don't repair the walls, you will use them. Otherwise, 1, the water leakage problem is solved, 2, the wall is bulging and shoveled off, 3, wait for the base layer to dry thoroughly, 4, fill the ash, brush latex paint.
-
Anonymous users2024-01-23There are many ways to treat the symptoms, such as shoveling the surface and then batch the gray oil emulsion paint, but not the root cause. If you want to cure the root cause, you can only hit the wall to see the water pipes, reconnect, test the water, and then repair the wall.
-
Anonymous users2024-01-22If you don't want to break the wall, you have to treat the symptoms but not the root cause, and if you want to do it, you have to do it thoroughly.
-
Anonymous users2024-01-21No professional repairs are required to break the wall and the area is a little smaller.
-
Anonymous users2024-01-20It is recommended that you find a professional waterproofing bar with pipes on the wall to re-do the waterproofing, or there will be problems after a long time
This should be caused by leakage in the place where the joints of the underground line are damaged and aging.
Water leakage is not the decisive role of the floor tiles, is the floor and waterproof layer, if it is accidentally smashed, it should be fine, if it is the floor slab cracking caused by the floor tile cracking should pay attention to, more information, better advice, free concrete waterproof leakage water repair professional technical advice, exempt from today's repair, tomorrow's leakage; Repair every year, the trouble of leaking every year.
Either it is something black that has been wiped or a black stain formed by mold that has been created by a humid environment. >>>More
Tianjin Capital Decoration reminds you that the bathroom wall is pasted with tile adhesive for polished tiles. >>>More
Bathroom for a brick does not need to do waterproof, but you change the brick process will be difficult to avoid the destruction of the waterproof layer, you must be careful, you take off the brick, the following brick layer has been hard, if you want to paste a new brick must shave off the brick layer, at this time waterproof is very easy to destroy, it is recommended that you change the brick do not shave the brick layer that has solidified below, to the building materials market to see if there is that kind of thin adhesive brick glue, be sure to scrape the brick under the glue, to prevent water seepage from the periphery of the brick in the future. Finally, the bricks are caulked around and must be embedded.