-
Anonymous users2024-01-24The old method is to play the line, hit the hole with an electric hammer, tie the wooden needle, and then put the wooden square on the wall and fix it with a large nail. Now nail directly to the wall with a 5cm steel nail gun.
The installation of the ecological wood ceiling first determines the installation plan, pay-off and drilling, the installation of the full wire boom, the placement of the keel, the leveling of the keel, the error of 3mm, the installation of the base liner, the lining plate can be selected with nine plywood or 5mm multi-layer board, with hardware hangers to install 100 25 square wood, ecological wood ceiling series products follow the traditional aluminum alloy, plastic steel ceiling installation method and the same general keel, therefore, generally know how to install aluminum alloy ceiling workers can install ecological wood ceiling, in addition to ecological wood can be nailed and planed, This makes it easier to install, cut and shape than aluminium alloy and plastic steel ceilings.
First of all, determine the installation plan, pay off the line and drill the hole, install the whole wire boom, place the keel, level the keel, the error is 3mm, install the base liner, and the lining plate can choose nine splints. 5mm multi-layer board, with hardware hanger installation 100x25 square wood can be this series of products follow the traditional aluminum alloy, plastic steel ceiling installation method and the same general keel, therefore, generally know how to install aluminum alloy ceiling workers can install the source of wood ecological wood ceiling, in addition to Tiancai ecological wood can be nailed and planed, so it is easier to install, cut and shape than aluminum alloy and plastic steel ceiling.
The top is flat bar! The outer edge is curved! If it is said that the top is arc-shaped, it is recommended that you choose the Karon ecological wood 159 small Great Wall, which is directly forced into an arc with external force, and it can be fixed.
50*60mm, 50*90mm, 50*100mm, etc. are recommended.
Install the ceiling angle and adjust it to level. The first row of keels is installed at a distance of not more than 150 mm from both sides of the wall, the horizontal height of the keel is 8 mm higher than the angle of the ceiling, the distance between the keel and the keel is not more than 500 mm, and the spacing of the boom fixing the keel is not more than 800 mm. Buckle the snap ceiling profiles one by one on the keel. >>>More