-
Plasterboard ceiling cracking, 1There is no figure-7 corner in the corner. 2. The seams are caulked, and the paper tape is not pasted properly.
The moisture content of the wood used in furniture manufacturing is too high, and the use environment is relatively dry, resulting in the loss of water in the furniture wood, which will naturally crack. >>>More
Under normal circumstances, if it is only the surface cracking phenomenon of linear, angular or amorphous cracks on the ceiling paint film, it may be caused by too thick brushing or not dry recoating, the substrate is too loose or rough, the primer and the topcoat are not matched, and the temperature change is caused by the fact that the problem is relatively not big, and the serious problem is the crack at the corner joints of the ceiling. >>>More
If it is only the formation of linear, angular or amorphous cracks on the ceiling paint film, it is not a big problem. This phenomenon may be caused by the first time, such as too thick or not dry and heavy, too loose or rough base, and mismatch between primer and topcoat. Fixes: >>>More
1. Cracking of all ceilings is one of the common quality problems in the process of home decoration, and no matter what kind of maintenance is done during decoration, the cracking of the ceiling cannot be completely avoided. Let me explain: >>>More
1. Gypsum board against the crack of the wall, is the wall and gypsum board. >>>More